light leakage is a diff thing..that happens at the top ot the casing

---

Added on January 6, 2009, 4:01 pmi've read in a few forums and blogs that it saves battery, but donno how much.. maybe depends on the 3g quality coverage.

This post has been edited by alpha_company: Jan 6 2009, 04:01 PM

will a clear SP also effect the sensor?

if in bright places i think this won't be a problem

---

Added on January 7, 2009, 4:06 am

maybe keep it for n97...hehe

---

Added on January 7, 2009, 4:11 am
hahahaha

u very rich also laa.. going nokia all the way ka?..

---

Added on January 7, 2009, 4:18 amWTF!!! where is that nokia care located? in KL/selangor or what? somebody here already went to nokia care and they give 1-1 replacement. but do remember it is their choice whether to repair it or to replace it. in that guy's case the nokia care chose to do 1-1 replacement and replaced the whole phone + boxed set.

even if the nokia care don't want to do 1-1 replacement, they should repair it. Did u show your Avaxx sticker/warranty to them?

---

Added on January 7, 2009, 4:21 ami think as long as the warranty won't void then go to atlantis and ask him to tighten the screw or whatever solution is available. if im not mistaken there's no sticker at the required repair parts to void the warranty.

if 1-1 replacement also prone to the same problems because the same 5800 1st batch...so better repair.

---

Added on January 7, 2009, 4:25 amwow this guy created a whole thread about the 5800 problem..

---

Added on January 7, 2009, 4:28 amnow got another prob la? maybe should wait for a new firmware as this can be solved by firmware updates..but donno how long to wait for a new one to come out.

---

Added on January 7, 2009, 4:31 amthat 1199 from that "guy" is avaxx but i saw that both his 5800 boxes are already opened..fishyy

---

Added on January 7, 2009, 4:40 am

you got the prob too ar?..aiyark. nokia don't know about this problem?.. im glad that some 5800 users with the problem contacted nokia directly. at least they know..

This post has been edited by alpha_company: Jan 7 2009, 04:46 AM

that is too expensive, the ORI Avaxx price now is somewhere between rm13xx to 14xx.
where are u buying it from? ap or ori?

make sure u get the full package

---

Added on January 7, 2009, 6:01 amthey fix your 5800 right? not exchange it? if fixed better then exchange because if exchange the problem could re-occur

---

Added on January 7, 2009, 6:41 amif send to other nokia care can get same results, because got one other person here that had his 5800 exchanged 1-1 for a new set


This post has been edited by alpha_company: Jan 7 2009, 06:41 AM

i got quote in penang for 5800, rm1360...quite cheap wor..

hehe i grabbed an n95 8gb instead. reli need the good quality pics that n95 8gb has..

if you want it fixed now, got the shop u bought it and ask them to tighten the required screws.

if you want nokia to fix it, got to nokia care and if they say have to wait official release, send it after the 9th.

got one person here who went to nokia care and got a replacement of a whole new boxed set of nokia 5800. if this is the case it still might not fix the problem as the 1-1 replacement set is also the same batch of 5800 and still prone to the problem. if nokia care decides to repair it, then that's the way to go.

---

Added on January 8, 2009, 8:17 ami got an n81 before and it's easy to install themes. i connect to pc, transfer the theme.sis file into memory card/mass memory, then install it from inside the phone.

if i want to uninstall it i just go to Applications > App. manager > uninstall (whatever theme u want to uninstall)

This post has been edited by alpha_company: Jan 8 2009, 08:17 AM

doesn't it use a a lot of memory? make the phone slow or something?

---

Added on January 8, 2009, 8:48 ami think this is for the signing of the application..they will send the signed app to u i think.

This post has been edited by alpha_company: Jan 8 2009, 08:48 AM

makes the phone bulkier but protects it from scratches at the back when we put the phone down on the desk etc..

but imo, the casing here makes the phone looks like it's more expensive and cooler




This post has been edited by alpha_company: Jan 8 2009, 08:55 AM

that's not a lot but interface wise does it make the phone slow a bit?

maybe needs modification as most if not all of the leather casing for 5800 has that problem.

i suggest using a belt-hole puncher and cut a nice clean hole at the required sensor.

this quickoffice app can support what files and editable? i want to install also

if for the Edit, do i need the sign cert too?

will shadows also make the display turn off? if say use leather casing even with a hole for the prox sensor, will the slight shadow caused by the casing turn off the sensor in normal or low light?

if ter-press also effects it? it's not you're covering the prox sensor with something

then what happened to your phone? still can't view the screen or alright already? well, it's a touchscreen..

---

Added on January 8, 2009, 9:53 ami've searched high and low for this casing, but to no avail. still can't find any seller here in lyn.

the manufacturer is Carrymobile. google it

This post has been edited by alpha_company: Jan 8 2009, 09:53 AM

yeah...now i understand.

that means if the casing moved a bit the IR beam will hit the casing and turn off. can the IR sensor be disabled from the phone or by using a sofware cause that will make sure that nobody has problems with their prox sensor.

---

Added on January 8, 2009, 10:03 amThe screen protector is clear but because it also reflects a bit of light at some degree it has a chance to reflect the IR beam back and thus turn the display off right?

This post has been edited by alpha_company: Jan 8 2009, 10:03 AM

that's y u can repair the phone by opening it with the plectrum...so easy to open, but that's not a good "feature"..

This post has been edited by alpha_company: Jan 8 2009, 10:15 AM

operation of the phone is smooth like before?

okay .now i understand how the IR sensor works. is there a possibility that the IR sensor does not have a wire and is soldered right onto the board?