if u really want to test ure oc
1. leave ure fan at stock fan speed aka 40%
2.run ati tool for 15 mins. and make sure u change the artifact scanning to the lowest setting so
3. watch the screen for any single dots
4. if the above pass then do this run for 1 min. stop run for 2 mins stop run for 3 mins stop run for 4 mins stop
5. if pass try 3dmark06 sm3 in 10 times loop.

if pass u can now flash ure bios and even sell ure gc at that speed u set

also always set core/shader/mem speed at the right increment. not inbetween. this will confuse ure clock generator and hence instability.
also hint hint try to maintain original ratio of the core to shade and have a even increment of all of them.


check the result and compare to some ppl here who is running faster than this

stock palit dual sonic is exactly 10% increment from stock ref card.

example for

friend rig that i tested. soon to be bios flashed as it pass the above requirement.

gtx260 palit 675/1174/1456 18 percent increment from stock nvidia ref card for core/shader/mem.



even before i increased the overclock i knew the gc will hit at 10800 just by percentage.
3dmark Vantage is very accurate
if u increase all by say another 10 percent u will get 10 percent increment in gc scores.

try it ppl.

This post has been edited by cstkl1: Apr 29 2009, 07:08 PM

i would like to use ati tool but everytime when i select scan for artifacts this error occur



when u say set core/shader/mem speed at the right increment meaning setting all 3 to the same percentage?

This post has been edited by ZeneticX: Apr 29 2009, 08:02 PM

Give people fish better teach him fishing
Here you go

After open bios at nibitor










1.8 Vcore

try at your own risk ya

lolz nice fish .thks vry much for tht info and guide

Jz saw the review of ENGTX260 Matrix what i saw is like this



and my card like missing some thing



Anyone can tell me what is that and what use of it ? please

thermal paste?

i mean the frame of gt200

that asus design bro...cant compare like that..huhuhuhu

Err am I missing something here?
Mine don't have those VDCC thinggy..

55nm gtx260 dunhav those vddc temps as they are no longer using those pwm plugs and volterra

dont know when engtx260 matrix will selling in malaysia. Gpu voltage and memory voltage software control enable

Hey anyone here OC GTX 295? As we know GTX 295 is combined with 2 slower clock and mem speed of GTX 275, I feels like OC it to the same speed as GTX275... anyone tried that? (I saw in other website how they dissemble entire GTX 295, I definitely not dare to try that at home...)

metsatsu oc his gtx295.u can pm me him and ask

Thanks for the info bro..

Hehee

mine is probably the maximum oc that i can achieve. coz it crashed in FEAR2, so finally i stepped back a little and this is what i ended up with.

And I've tried to disassemble the card. but then realized that i don't have the right screw driver. the screws are extremely tiny (like the type being used on spectacles) so u need those type of screw driver and good quality one. and NVIDIA screwed it SO DAMN TIGHT!! if u use a cap ayam screw driver and dug until the screw's 'bunga' become round, that's it for that screw, it will be stuck there forever (had experience with that in other electronic device b4). so now i'm on the look for good quality small screwdriver

ZeneticX did you really oc your gtx 260 to 1480 mem?? which like 2960 mhz for memory? are you using any gpu cooler? or anything? voltage tweakS? is it running stable?? which brand gtx 260 is yours?

acecombat and pws they did 1550 and 1600? which is like 3100 and 3200 mhz for mem hows that possible??

its 1480 shader,1170 for mem

gtx260+ user joining in...

welcome to the club bro

thank u....eh? u sungai petani wan ar? lol..next time can come and lepak with me..m studying in mpsah..