Can add mine for the phenom II? Here it is :

btw,u guyz using PhysX eh?

yep.most of the scores have physx enabled

oh..alrite..will update with physX later...Thank you....

hehe...thnx bro...
i dont know under my sensor tab is so little...
i think thats all...
can you show your sensor tab bro??...
btw do i need to flash my bios to?

not realy tht necessary to flash the bios unless ur gc realy perform not so good in oc.

and u must noe the risk of flashing the bios,it might fail and u will get a expensive paper weight in ur casing

55nm one due to cost problem oredy cut down many thing, even don hv volterra VT1165 chip , so 55nm one cannot use software to control voltage, only can increase voltage by edit bios

---

Added on April 18, 2009, 3:52 pmp651 use 14- layer pcb---->P654 use 10 layer pcb---->P897 use 8 layer pcb

This post has been edited by nncl: Apr 18 2009, 04:04 PM

ZeneticX...i think u should post guide to use software for control voltage like nncl mentioned.. or maybe a link? or i missed it?

EVGA GVT can do this , but it only for evga card, u need to find crxxked version

yes use the cracked evga voltage controller.i have it but duno wheter its legal to post it here

bro zeneticX,another update...
see my post #257...
same core speed but different result...

Erm...power up maybe can...but i dun think can survive the full load of ur gtx260+ later...

ntbtd, i flash my bios into 700/1200/1400

What speed your processor running at?

-pWs-

how did u do it bro?
and what about the temp?
is it hot?

Nibitor & Nvflash.
Flash at your own risk.

-pWs-

Download & backup your original BIOS using G-PUZ
Modified the value with Nibitor
Update BIOS using NVFlash
Idle around 58c
Gaming could reach 78c


Hahaa.. Yepp, you correct

eh u do know right u shoudnt backup ure bios using gpuz..
its a bin format. and the first few asci key is different from rom format.
so changing it to rom and flashing with nvflash is risky

also if theres a extra bit on the mem timing.. gpuz wont read it.

backup using nvflash.

pretty easy
nvflash -b backup.rom
if u have more than one card
-i0 for first pcie
-i1 for second etc

well, the .bin can easily change into .rom using nibitor
use the function "Save As.."

regarding the mem/ timing etc, im not quite sure

This post has been edited by gengstapo: Apr 19 2009, 08:29 PM

I think cstkl1 suggested not to take the bios using GPU-z from the card, but w Nvflash.
Nice info there.

-pWs-

Geezs... I'm having problem to OC further my card (GTX 260+) using Rivatuner, everytime I try to push the core clock to 710, it would revert back to 700 when I press OK. Anyone having this problem?