and how high is that??

i look around the bios and its at 1.06v

I checked the vCore from NBitor.
3D vCore is 1.12v.

@hilmiangah
Mind to check yours as well?

-pWs-

my 3d vcore is 1.06 as well.extra vcore default is at 1.06 too,but i chg it to 1.12

You change it w NBitor?
Do you flash to your GC??

-pWs-

yep.its already flashed to the gc.

i extracted it out once agn to chk just to make sure

Wow. Any improvement on oc??

-pWs-

i need to extract my bios 1st.

cant use nibitor for that.i got error stating that it cant start driver.

Use GPU-z to extract.
But still, you need NiBitor.

-pWs-

last time i cant get over 680mhz on core i was on this bios as well,and i was thinking it doesn't give any improvement on oc just heat .it used to be on 1.19v,after seeing all the oc cant get over 680 mhz i gave up and lower it down to 1.16 to reduce unnecessary heat

then after i learned bout the 1:2 ratio thingy im at my current clock now

I see.
But until now, I still dunno why the need of 1:2 ratio since we can achieve higher shader w normal ratio.

-pWs-

i tried pumping my shader and core further but it seems my card is unhappy with both of them

higher shader needs higher core?

Ermm.
For your case, you use 1:2 ratio.
715core will result your card at 1430shader.

For my case, 715core will result my card at 1537shader. (Default ratio)

-pWs-

and thts how many : how many for default ratio?or it varies depending on card?maths noob here

gonna sleep now.chiaoz

This post has been edited by ZeneticX: Apr 18 2009, 04:25 AM

I am not sure whether depending on card o not.
For Palit GTX260+ Sonic, the shader speed is around 2.15x of core speed.

-pWs-

me 2 bro,when i want to submit bios it says "cant connect to service manager"
just want to check the gc vcore?
any other way?

use gpu-z and extract ur bios,save it to a location,then open nibitor,select open bios file

btw mind posting a vantage or 3dmark06 score of ur highest stable oc?wanna add u to the 1st page list

and post a temp result as well,wanna see how ur 3 fan cooler perform

This post has been edited by ZeneticX: Apr 18 2009, 02:04 PM

thanks bro...
now i can open it...
so far it can go 677/1105/1462...
temp less than 70 when in stress...
i think my cpu bottlenecking my gpu now...








This post has been edited by selfdz87: Apr 18 2009, 04:41 PM

auto fan speed?if less than 70c then its good,well at least better thn palit's dual fan cooler .try running any high reso or graphic intense game for a couple of minutes and see the temp?

bro zeneticX...i post the new pic above with temp after running the 3dmark vantage wit auto fan speed
so far so good...

alright.updated

y is there so little sensors under the sensor tab?is it 55nm 260 all like this?now i oni notice

try to get 3dmark06 btw

This post has been edited by ZeneticX: Apr 18 2009, 03:06 PM