Dec 1 2008, 12:17 PM, updated 17y ago
Sound And Heat Insulation Material
Why Use Insulflex?
•Low thermal conductivity or "K" value.
• Its closed cell nature requires lower thickness compared to other products of same density, thus cost saving.
• No jacketing/vapour barrier is required due to the tough skin formed during the manufacturing process. In comparison other insulation products such as glasswook require a layer of jacketing to prevent water moisture which will affect the "K" value.
• "K" value is very stable due to the closed cell nature compared to other products.
• Flexibility enables perfect insulation to fit bend
• Closed cell is non-hazardous. No precaution is needed in handling and installing the product.
The INSULFLEX come with Self-adhesive backing easy to stick no need use gum,no smell ,save many time
Fire Resistance
-The INSULFLEX is use at industrial for sound and heat insulation. and also good sound proof for car
AVAILABLE SIZE AND PRICE
-6mm x 4ft x 30ft = one roll--call/pm/sms me for best price
-6mm x 4ft x 3ft per sheet-- call/pm/sms me for best price
-10mm x 4ft x 30ft =one roll--call/pm/sms me for best price
-10mm x 4ft x 3ft per sheet--call/pm/sms me for price
call/pm/sms me for faster reply
Specifications
• At -40°C, Insulflex Closed Cell Insulation becomes hard and as temperature drops below -40°C will be increasingly brittle; however this hardening characteristic does not affect thermal or water vapour permeability.
• The Fire Rating standard method of tests conducted under controlled laboratory conditions is a measure of a material to spread flame when compared to a known standard and is not intended to reflect hazards presented by this or any other material under actual fire conditions.
- Self-adhesive backing no need to use any glue,no smell,save time
- Lightweight material
- Easy to use just cut, peel and stick
- Very flexible easy to stick
- Very low water absorbtion rate
Recommended to use on :
1. Doors And Door Panel
2. Front bonnet
3. Rear trunk
4. Boot floor and walls
5. Floor
6. Front fender / wheel arc
7. Roof
8. Engine firewall
9. Any part of the car
-One roll enoungh the whole car
-One sheet for wira two door or Front bonnet
Very good results and door become very solid especially at the roof
DIY Insulflex at aircon pipe insulating heat from engine
My location at Cheras Area and Ampang for COD at other place can be arranged
For post minimum 2 sheet or above
Interested can call/sms/pm me 012-6525004
E.mail/MSN: jun_jun_yyh@yahoo.com
This post has been edited by jun_jun: Oct 24 2009, 01:25 PM
Quote
Even teach me about the installation skills and the best part the apply.
0.0394sec
0.33
7 queries
GZIP Disabled