SECOND SKIN FOR THE CAR


Sound And Heat Insulation Material


Why Use Insulflex?

•Low thermal conductivity or "K" value.

• Its closed cell nature requires lower thickness compared to other products of same density, thus cost saving.

• No jacketing/vapour barrier is required due to the tough skin formed during the manufacturing process. In comparison other insulation products such as glasswook require a layer of jacketing to prevent water moisture which will affect the "K" value.

• "K" value is very stable due to the closed cell nature compared to other products.

• Flexibility enables perfect insulation to fit bend

• Closed cell is non-hazardous. No precaution is needed in handling and installing the product.




The INSULFLEX come with Self-adhesive backing easy to stick no need use gum,no smell ,save many time


Fire Resistance

-The INSULFLEX is use at industrial for sound and heat insulation. and also good sound proof for car

AVAILABLE SIZE AND PRICE

-6mm x 4ft x 30ft = one roll--call/pm/sms me for best price
-6mm x 4ft x 3ft per sheet-- call/pm/sms me for best price
-10mm x 4ft x 30ft =one roll--call/pm/sms me for best price
-10mm x 4ft x 3ft per sheet--call/pm/sms me for price

call/pm/sms me for faster reply

Specifications

• At -40°C, Insulflex Closed Cell Insulation becomes hard and as temperature drops below -40°C will be increasingly brittle; however this hardening characteristic does not affect thermal or water vapour permeability.


• The Fire Rating standard method of tests conducted under controlled laboratory conditions is a measure of a material to spread flame when compared to a known standard and is not intended to reflect hazards presented by this or any other material under actual fire conditions.

- Self-adhesive backing no need to use any glue,no smell,save time
- Lightweight material
- Easy to use just cut, peel and stick
- Very flexible easy to stick
- Very low water absorbtion rate

Recommended to use on :
1. Doors And Door Panel
2. Front bonnet
3. Rear trunk
4. Boot floor and walls
5. Floor
6. Front fender / wheel arc
7. Roof
8. Engine firewall
9. Any part of the car

-One roll enoungh the whole car
-One sheet for wira two door or Front bonnet




Very good results and door become very solid especially at the roof




DIY Insulflex at aircon pipe insulating heat from engine

My location at Cheras Area and Ampang for COD at other place can be arranged

For post minimum 2 sheet or above

Interested can call/sms/pm me 012-6525004
E.mail/MSN: jun_jun_yyh@yahoo.com

This post has been edited by jun_jun: Oct 24 2009, 01:25 PM

how much ?

COD location?

rm one roll at cheras area

This post has been edited by jun_jun: Dec 2 2008, 09:35 AM

any other place can COD?

u do any shipping to sabah.??

yes no problem but one roll i check the shipping fees 1st

i want want 3ft..which area of ampang nyway

bro which area at u???

---

Added on December 1, 2008, 9:18 pmnear ampang lrt

This post has been edited by jun_jun: Dec 1 2008, 09:18 PM

OH my god !!!

just buy last weekend for 6mm per sheet rm50 , 10mm-rm60......................

SHIT !

oh that means my sell too cheap i want up the price

eh come on la barfly... i sell at higher price doesnt mean i am cheating ppl...

i sell my service... and my knowledge to ppl...

pls delete ur post in my thread. thanx!

my location is sk.

hi bro PM me best price for one roll... 6mm and 10mm. thanks!

all pm reply

hi bro PM me best price for one roll... 6mm and 10mm. thanks!

how much for cefiro a32 bonnet + 4 doors?

plz pm me price for 3 ft
both 6mm and 10mm

This post has been edited by gepard: Dec 2 2008, 03:14 PM

price?pls pm me for 10mmx4ftx30ft thx

check ur pm