SECOND SKIN FOR THE CAR


Sound And Heat Insulation Material
Why Use Insulflex?

•Low thermal conductivity or "K" value.

• Its closed cell nature requires lower thickness compared to other products of same density, thus cost saving.

• No jacketing/vapour barrier is required due to the tough skin formed during the manufacturing process. In  comparison other insulation products such as glasswook require a layer of jacketing to prevent water moisture which will affect the "K" value.

• "K" value is very stable due to the closed cell nature compared to other products.

• Flexibility enables perfect insulation to fit bend

• Closed cell is non-hazardous. No precaution is needed in handling and installing the product. 

[attachmentid=695669][attachmentid=695671]

[attachmentid=695670][attachmentid=695674]
The INSULFLEX come with  Self-adhesive backing  easy to stick no need use gum,no smell ,save many time

[attachmentid=695676][attachmentid=695677]
Fire Resistance

-The INSULFLEX is use at industrial for sound and heat insulation. and also good sound proof for car

AVAILABLE SIZE AND PRICE

-6mm x 4ft x 30ft = one roll--call/pm/sms me for best price
-6mm x 4ft x 3ft  per sheet-- call/pm/sms me for best price
-10mm x 4ft x 30ft =one roll--call/pm/sms me for best price
-10mm x 4ft x 3ft per sheet--call/pm/sms me for price

call/pm/sms me for faster reply

Specifications

• At -40°C, Insulflex Closed Cell Insulation becomes hard and as temperature drops below -40°C will be increasingly brittle; however this hardening characteristic does not affect thermal or water vapour permeability.


• The Fire Rating standard method of tests conducted under controlled laboratory conditions is a measure of a material to spread flame when compared to a known standard and is not intended to reflect hazards presented by this or any other material under actual fire conditions.

- Self-adhesive backing no need to use any glue,no smell,save time
    - Lightweight material
    - Easy to use just cut, peel and stick   
    - Very flexible easy to stick
    - Very low water absorbtion rate

Recommended to use on :
1. Doors And Door Panel
2. Front bonnet
3. Rear trunk
4. Boot floor and walls
5. Floor
6. Front fender / wheel arc
7. Roof
8. Engine firewall
9. Any part of the car

  -One roll enoungh the whole car
    -One sheet for wira two door or Front bonnet
[attachmentid=699685][attachmentid=699686]
[attachmentid=732729][attachmentid=742964]
Very good results and door become very solid especially at the roof

[attachmentid=732739][attachmentid=732742]

[attachmentid=742966][attachmentid=742968]
DIY Insulflex at aircon pipe insulating heat from engine

My location at Cheras Area and Ampang for COD at other place can be arranged 

For post minimum 2 sheet or above

Interested can call/sms/pm me 012-6525004
E.mail/MSN: jun_jun_yyh@yahoo.com