It's the same since we convert most of it in english

Even you want, you still need a casing of the xbox 360 hdd.

Less then half an hr only. close 1 eye can do without the data transfer.

Where can I get the HDD casing for jasper arcade? I do not have old xbox360 harddisk.

anyone success flash WD1600 BEVT?
izzit the same as 1st post?
any thing we need to change?

thank

You can't. best is get a at the pasar malam thread for a 2nd hand 1.


It's the same. someone manage to flash it successfully. Depends on luck though

I can get any HDD included with the case from any old model of xbox360 to slot in to the jasper arcade, right?

yes.u can

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
got my success flash to 360 120gb hdd

but this problem i face:
>after flash for the 1st time ,hddhackr say "the drive can be use in 360"
>winhex the number
>plug to 360 cant detect

>after undo.bin back to WD
>flash to fuji , 2nd time it didnt say "the drive can be use in 360",
>it only ask me to flash press "Y"

ps:make sure u connect to sata0

this what i did:
>flash back to WD
>go inside windows make a partition > format > delete back the partition
>flash to fuji using hddhackr(only flash 1 time,didnt bother the "the drive can be use in 360"never come out)
>plug to 360 and it detect and format it
>i skip the emulator for xbox 1
>and i also skip to copy back all my save cus i got 256mb flash save inside
that all i get it done

my hdd is WD1600BEVT-00ZCT0
just change from the shop from wd1600BEVS-00VAT0
cus they say this model cant flash to 360
http://bbs.tvgame360.com.tw/viewthread.php...page%3D1&page=1

hope it help someone who encounter same problem as my
good luck to all

This post has been edited by chickenducksoup: Jan 12 2009, 05:39 PM

I have successfully upgrade with BEVT. HDD is now working like GEM.

it can. It only depends on luck. 1 or 2 of us here manage to flash with BEVT. BEVS is hard to find.

ya i manage to flash my BEVT to x360 HDD......so happy

i was succeed to flash my WD BEVT too. Succeed in 1 shot~
chickenducksoup and i were carried out a conclusion, the conclusion is don't check whether the hdd is support to x360 after flash, flashed it in once and connect back to x360.

he and i were succeed with this.

It's kind of straight forward to flash the HDD if you don't need to backup the file from your smaller HDD. The whole process is about 5 min only. Once it prompt the HDD can be used for xbox 360, I just replace with the 20GB and it works. Thanks for the clear instruction shown. Also, thanks for Chickendukcsoup who actually send me a copy of backup firmware which I overlook. Thanks~

I read wrongly. LOL.

BEVT is harder to flash cause the firmware wasn't created for BEVT type but for BEVS type.

Anyway, congratulations for those able to flash it.

i was using BEVS and it was tough as well



exactly 20 hours of non stop action

but well worth the shit

mine BEVS 160GB cant be flash ,ended up as portable drive

somehow , i take out the WD Portable Passport drive and able to use on the X360 ... O_o

describe take out??

Hey guyz,
I just flashed my BEVS 160GB and use it on my xbox..
I can use those hdd on my Jasper, edit profile, making avatar on it, save games and even install games..
but when I put the hdd on PC, its just have 1 partition.
is this OK?
since all seem to be functional on xbox360, just that I cant view those 2 partition on hdd..

partition 2 is for xbox (non 360) saved games

why would u bother plugging it into ur PC once its xbox-able

please use it as a 120gb xbox hard disk and leave it there

For those who want to flash WD BEVT, don't check the flashing status when the software is request to run for status checking.

Flash the new WD BEVT to fujitsu firmware, after succeed,disconnect and connect to x360 directly, skip for the 2nd time hddhack status checking.

Advise:
Forget about the backup, this may make the hdd can't recognize by x360 even it did succeed recognized by x360 after flashed.

I met this issued when i want to backup my content.
If you meet this problem, undo the firmware and flash again to fujitsu in once, juz remember don't running the status checking, ignore it.

oh! Im actually worried if I missed something because I stuck on few step on the guide given.
I manage to backup the partition 2 and 3 on the original 20gb hdd, and because of the xboxplorer cant read my new 120gb 2nd and 3rd partition, I cant restore the backup partition from old hdd to new one.

anyway thanks for the feedback, I will continue using the hdd now and will monitor it frm time to time.
tq

This post has been edited by gmos: Jan 16 2009, 12:52 AM

ya i face the same problem also
when copy the xbox 1 emulator , the hdd cant detect at x360.
have to redo all the step again