that's under stress condition.
Load while gaming is different

yes but i think he want to know what that GS cooler is capable enough.

by the way the difference between furmark and gaming load is around 15'c to 20'c.

oic.. thanks ya.. i'll try it out..

hi all gainward user.... long time no see...

yup..furmark is the best way,but u can always use GPu-Z to record the temp while gaming....and from there u can c it ur self...

what's the temp of 4850gs usually? idle and load..

This thread has been inactive for so long .

Got tired of my 4850GS's stock fan making noise and decided to plug it off and then installed the 80mm from the back of my mobo to see how it goes.



Very clumsy way of fitting it, but this is just temporary.

So far temp seems to be better than stock fan @@! But not yet close the side panel yet ._. But its good to be back on silent . Instead of the noisy stock that sounds like the fan has been used for years and going to break down anytime.

hey..what did u use to ikat dat fan ar??

Very creative. Using strings to tie the fan

I think he use the nylon string to tie it up.

No news on Gainward 4890 yet?

Cause, my ears cannot tahan the noise of a spoil fan. At first use lubricant then was ok for a week or so, then no effect already. So decided to take the 80mm from the back of my motherboard. Was finding for my stack of cable tie. But so far so good, temperature I think is lower compared to the stock fan!

Arh!!! My 4850GS is getting noisy, last time set 40% fan speed can lower the noise now have to lower to 30% to do the job. I think it is starting to fail... So, Celciuz, how you took out the fan? Got screw inside?

Don open it, if u got budget u can buy one Artic Cooling twin turbo... HAHa

my 4850gs very weird..always cant detect signal on my monitor..yesterday bring to ATE to check n they wipe de gold plate at gc there den plug bc,can detect n running fine but now happen again...wat should i do?juz bought it on Jan..

It happenned on me twice. I keep on re-plug the card and re-plug the 6pins cable until it works. So, you can try it out. Yes, very weird indeed.

---

Added on April 28, 2009, 4:28 pmSo anyone 4850GS's fan getting noisier? Or it is juz me and Celciuz...

This post has been edited by lotiman2003: Apr 28 2009, 04:28 PM

Mine is super noisy, removed it and put my CM690's back mobo fan liao LOL. Now peace man

my GS is ok.. no prob..
idle : 43 load 55-60
fan setting and all just like pre-OC..

My 4850GS was left at 50% all the time (default). But less than 6 months time the fan already spoil :S.

Is it ok to set the gpu to 750 and memory clock to 1150 in ati overdrive?

I'm using 4850gs btw..