800-1000Mhz would be fine.

Depend on board.

-pWs-

yaya.. this properly depent on ur mobo... if u using kinda nice mobo thn OC HT 2gahter oso not a prob...

Hi bro, thanks to your encouragement, if you think it's good it's all due to you. Anyway I did not read the rules prior to OC & I apologize to all for that but I do have 2 separate snapshot(looking at the date & time it's done at the same time) of cpuid on mem & cpu with Prime stable for >2 hours as attached. Let's hope it's OK and actually i don't intend to be the highest OC around here, credit shud be given to these AMD proc, that's all. BTW isn't Prime a tough stress test ?



Attached thumbnail(s)

Currently using 1.325v but kinda strange why when i started to stress it will go up to 1.344v ..1.25v+0.075 should be 1.325v isn't it? How bout yours? 3.4Ghz need what kind of voltage?


Attached thumbnail(s)

Usually AMD chipset mobo no problem to oc HT-link over 1000mhz ..amd690chipset mobo can handle it more then 1500mhz
most nvidia chipset mobo cannot handle it over 1000mhz.....only got a few can handle it but no very high.

done oc my proc.. now trying to push my ram lak..

This post has been edited by anep: Oct 23 2008, 12:44 AM

i manage to hit 500mhz
meaning my ram running at 1k mhz aite?

This post has been edited by anep: Oct 23 2008, 12:54 AM


Attached thumbnail(s)

normally default for 1.25v cpu volatge will +- 0.020 or 0.025 on idle and load
so ur proc 1.25+0.075=1.325+0.020 =1.345 for load if idle will 1.305 or 1.300

u nid to lock up the CPU/NTP -VID to the voltage u want
example
CPU voltage startup = 0.075
CPU/NTP -VID =1.25

Well mine requires 1.47VCore to stable(not prime stable)but...even extracting,gaming..everything no BSOD/crash.The strange is..CPUZ keep reporting it is at 1.51V

deleted::

This post has been edited by digswell: Oct 23 2008, 12:51 AM

Means everything is ok but will fail when u stress it using other program like Orthos?

I check already bro..so it is normal to have 0.025+ or -? Or is the problem with 3 phase power?

Yes Fuilo.Extracting,gaming,3DMark,Furmark or whatsoever everything pass and stable.Orthos,SPI 32M,OCCT and Prime failed
Still i could increase my VCore if i want to enter database.But for the time being...let it down..

tight it

Yup...make it 4-4-4-12 w MAL 8

-pWs-

Unfortunately..one have move to dark side..

Haha..i also give up trying ady since this 3.2Ghz @ 800Mhz ram..just let it be at the moment..previously imsmiko hit 3.5Ghz wif 1.6xx vcore dunno whether is prime stable or not..

I thought is performance level for intel (set to 8)

Intel is tRD (Performance Level).
AMD MAL is Max Asynchronous Latency.

I do not think it is the same thing.

-pWs-

Yea it should be different since AMD has IMC..
Sad o sad

Core i7.

Really hope AMD fight back. Intel play this game for too long d.

-pWs-

Haha..bro sorry for my noobness..so same like performance level in Intel the lower the better?