Ah Soh ANN
wanna tackle later

this board have 3 phase Pwm, cooling down n u ready to push more.. heat is the main reason
my advice, stop the oc unless u put any to cooling'em down

for me, it's not...

i think he sell quite cheap too

me r?
new toy only gc n board coming soon, no new proc, any1 wanna give proc for oc, i play la.. then return back ..wakaka

dah cantik la tue.. add vcore, help u?
emm what option u use whe orthos? blend?

This post has been edited by xixo_12: Oct 25 2008, 10:13 PM

emm what option u use whe orthos? blend?

3.4 need around that.. 1.5~1.6 3.5ghz.. answer my question

try to torture proc only... small FFT
achieve 15min?

This post has been edited by xixo_12: Oct 25 2008, 10:31 PM

vcore i think.. unless u want to push moar.. need to add the vcore la..
lower down ur HTT like 330.. same vcore, let it use that setting for 2days, then try to push a little n see how.. luck come second

take care of ur AH SOH WIND

ah_khoo, u the one, i never have a chance to play phenom, ur skill higher

single core with GEMUK cooler

how it perform? compare with TRUE..
try oc with it? temp..

there is small FFT and large FFT, normally we use blend to test the overall for stability.
if u use small FFT, it will stress only the proc.. normally i use 15min method, if u pass this stage u have no problem and u can push more,
in MENCHELSEA case, he use 1066 ram, tat why i ask him to use small FFT, i already assume the time will never exceed 1 min if overall alredi less than 1 min..

This post has been edited by xixo_12: Oct 26 2008, 12:06 AM

his ram running 4xxmhz onli, default is 533mhz, so? it running less than normal rite.. so i dun think that is a problem, so no point to use large or blend test to test the ram, ram shud fine..

i cant say so much about the wall, it depend sumtimes, what u need to do, is keep trying to know about it, if u cant push more, it depend on a lot of factor, heat(mobo effect), proc limitation, vcore not sufficient,

so for ur system, u use blend and it show not stable? (remember, orthos have bugs)
that why i never trust any software for stability, 15min method > gaming > testing for 2 days is the best way for me..
if u found BSOD, or hang, adding a little vcore, and, u ready to go for testing again

keep the word in mind,
luck come in the second place , today u didnt got what u need, tomorrow u will achieve it,

This post has been edited by xixo_12: Oct 26 2008, 08:09 AM

nice try, push slowly, remember last time, when i use LE1620 for oc, this proc really a headache actually, to far push the vcore it wont booting, after try 3 month , i found the correct setting , it's 3 month, step by step
after found the highest i try to find the lowest with stock vcore, can't pass 3.1 at that time, after long time, i try again, this time playing with bios, nah, 3.12ghz.. really tired

better u look at SPD tab, then decide slowly what u want to use

400 with that timing shud be ok.. remember to check bandwidth.. n tweak 12-20 maybe u can get higher bandwidth by lower it

ehem.. put the effort
u know what i mean

write,copy n read higher better,
latency must lower

here as ur reference

folding..always folding

advice: running pretty cool k with 1.5V