but i had lost the super pi screen shot.
wat i had left i think is the record

I have this left in my data drive..

can i still be on the list with these? my old record though..
This post has been edited by blonely: Apr 4 2009, 07:01 PM
INTEL P4/PM 478/479 THREAD, >>V7<<,, The Journey Continues Here!
|
|
Apr 4 2009, 07:01 PM
|
![]() ![]()
Junior Member
212 posts Joined: May 2007 From: PJ |
|
|
|
|
|
|
Apr 4 2009, 08:27 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
5,341 posts Joined: Jan 2003 |
@eclectice,2.8GHz @ 400FSB is kinda hard to get it.Good luck in searching that.
@blonely,your Super PI was on 3449MHz also? |
|
|
Apr 4 2009, 11:43 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,039 posts Joined: Jan 2003 |
Just done cleaning my axp rig. the alpha cooler damn dirty, cause the windows hang around 8+pm just now. once check the temp in bios... 60C
@ray yea... cm extremepower 460w... now everything no sweat at all... can sleep better already @bloney haha... looong time didnt play superPI already. my best result is once below 40sec. it was on my prescott 2.4A@3.4GHz if not wrong. @eclectrice ray just sold off his 2.6C not long ago........... This post has been edited by kabukiawie: Apr 4 2009, 11:48 PM |
|
|
Apr 5 2009, 12:43 AM
|
![]() ![]()
Junior Member
212 posts Joined: May 2007 From: PJ |
@ray
guess so...i remember its 41s+ and i never touch it anymore after that... but dun have the proof of it... @kabu I rmb i never make it below 41s... as my ram jz a-data value ram...only can stay stable at that fsb with 3-3-3-8.. This post has been edited by blonely: Apr 5 2009, 12:45 AM |
|
|
Apr 5 2009, 12:05 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
5,341 posts Joined: Jan 2003 |
QUOTE(kabukiawie @ Apr 4 2009, 11:43 PM) Just done cleaning my axp rig. the alpha cooler damn dirty, cause the windows hang around 8+pm just now. once check the temp in bios... 60C Nice to hear that your rig is up. @ray yea... cm extremepower 460w... now everything no sweat at all... can sleep better already @bloney haha... looong time didnt play superPI already. my best result is once below 40sec. it was on my prescott 2.4A@3.4GHz if not wrong. @eclectrice ray just sold off his 2.6C not long ago........... QUOTE(blonely @ Apr 5 2009, 12:43 AM) @ray My RAM too,have to use 3-3-3-8 timing to run on high freq. , else is not stable.guess so...i remember its 41s+ and i never touch it anymore after that... but dun have the proof of it... @kabu I rmb i never make it below 41s... as my ram jz a-data value ram...only can stay stable at that fsb with 3-3-3-8.. |
|
|
Apr 5 2009, 05:00 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,526 posts Joined: Dec 2005 |
Yesterday night heavy lightning strike.
After that found out my p4 rig dead, I suspect it's the PSU since it has some very soft "buzzing" noise when I switch on the Mains power. Then today found out that the ADSL modem is dead as well. My laptop cannot detect the modem and the modem's ethernet LED is not on as usual. So today bought a new PSU and ADSL modem. The new ADSL modem is working. However, the p4 rig is still not working after replace the PSU. The motherboard's internal power LED is still not on and still cannot turn on. But I touched the motherboard's network chipset and it's very HOT! So is that the motherboard dead liao? How much an old socket 478 motherboard should cost now? |
|
|
|
|
|
Apr 5 2009, 05:32 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
5,341 posts Joined: Jan 2003 |
QUOTE(voscar @ Apr 5 2009, 05:00 PM) Yesterday night heavy lightning strike. If only the network card chip is gone you can always get another PCI-based network card to replace with it.After that found out my p4 rig dead, I suspect it's the PSU since it has some very soft "buzzing" noise when I switch on the Mains power. Then today found out that the ADSL modem is dead as well. My laptop cannot detect the modem and the modem's ethernet LED is not on as usual. So today bought a new PSU and ADSL modem. The new ADSL modem is working. However, the p4 rig is still not working after replace the PSU. The motherboard's internal power LED is still not on and still cannot turn on. But I touched the motherboard's network chipset and it's very HOT! So is that the motherboard dead liao? How much an old socket 478 motherboard should cost now? |
|
|
Apr 5 2009, 06:36 PM
|
![]() ![]()
Junior Member
149 posts Joined: Aug 2008 |
socket 478 mobo still have at Lowyat plaza. Just a few unit.
|
|
|
Apr 5 2009, 06:39 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
5,341 posts Joined: Jan 2003 |
@llutephie,see from your signature.How does your 3850 perform with your 3.2GHz? Any benchies to share with us?
|
|
|
Apr 5 2009, 07:07 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,526 posts Joined: Dec 2005 |
|
|
|
Apr 5 2009, 07:47 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
5,341 posts Joined: Jan 2003 |
|
|
|
Apr 5 2009, 09:32 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,039 posts Joined: Jan 2003 |
@ray
thats my old cpu la... maybe is because of the 1mb L2. well... yes, using my current p4p800x. running 1:1. 2.4A running on 188-190fsb, forgot already. not stable priming but manage run superPI. after that drop back to lower speed for everyday usage. that time was crazy times. now behave like good kids, all stock. |
|
|
Apr 5 2009, 10:09 PM
|
![]() ![]()
Junior Member
149 posts Joined: Aug 2008 |
QUOTE(raymond5105 @ Apr 5 2009, 06:39 PM) @llutephie,see from your signature.How does your 3850 perform with your 3.2GHz? Any benchies to share with us? My 3850 very well with my 3.2Ghz although still hunting P4 EE This post has been edited by llutephie: Apr 5 2009, 10:10 PM |
|
|
|
|
|
Apr 5 2009, 11:00 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
5,341 posts Joined: Jan 2003 |
|
|
|
Apr 6 2009, 12:52 AM
|
![]() ![]()
Junior Member
212 posts Joined: May 2007 From: PJ |
QUOTE(voscar @ Apr 5 2009, 07:07 PM) I wishes only the network card is gone, but in fact the WHOLE motherboard is not working..... Good Luck on your hunt. Found somebody selling old s478 mobo for around rm80.... QUOTE(llutephie @ Apr 5 2009, 10:09 PM) My 3850 very well with my 3.2Ghz although still hunting P4 EE curious on the performance of the 3850 with ur rig ^^ not going to change your monitor to 23" with this powerful set? @ray so can i be on the list with my old set and record? |
|
|
Apr 6 2009, 09:05 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
5,341 posts Joined: Jan 2003 |
@blonely,updated already in the list.
|
|
|
Apr 6 2009, 09:23 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,039 posts Joined: Jan 2003 |
i think i will try push to the my cpu to max tonight. hopefully the new psu can help a bit.
last time my 2.8c only manage to reach till 3.4+- like that @llutephie i think even with p4EE, i dont think the performance will boost alot compare to your 3.2E. maybe 5%+- like that.... just noticed your mobo is same as mine. |
|
|
Apr 6 2009, 09:56 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,940 posts Joined: Nov 2004 From: Soviet Sarawak |
@kabu,
good luck...push kaw kaw... |
|
|
Apr 6 2009, 10:02 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,039 posts Joined: Jan 2003 |
@ed
neh..... just-for-fun try. |
|
|
Apr 6 2009, 10:10 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,940 posts Joined: Nov 2004 From: Soviet Sarawak |
@kabu,
after pushed, u can always come look 4 me, get games 2 try, hehe... the last remnant rpg frm squaresoft manyak shiok ooooo... or strategy RA3 expansion cool also... on a side note, i have pushed my new setup to the limit also already This post has been edited by edministrator: Apr 6 2009, 10:12 AM |
|
Topic ClosedOptions
|
| Change to: | 0.0238sec
0.74
6 queries
GZIP Disabled
Time is now: 21st December 2025 - 09:52 PM |