seems a quite brilliant idea there bro. try 1st n gud luck nway

cannot bro... tested it... there will be around 1/2 inch clearance problem... plus the placing for the inner fan isnt right too...



This post has been edited by ham_revilo: Oct 18 2008, 03:57 PM

@celciuz

this is how i did it...




if u really wanna cut out like i did, the inner fan u have to cut it to the right a lil... around 1-1.5cm to the right... or not the top panel will be blocking...


u will actually get alot more space if the fan were not inside your casing and i think its better in term of air flow, coz the hot air is directly blown out this way...

Hmm, I'll start by cutting the plastic parts off first and see what I can do about it. That plastic part feels so soft.. err easy to remove one right? Can just use wire cutter?

yup... very easy... use normal "playa" can edi... just found a link in youtube for that



i did exactly the same but i dismantle everything and i file it so no sharp edges...

This post has been edited by ham_revilo: Oct 19 2008, 03:10 AM

helping u to put the video since ur post not complete

The Video is really .......
I have no idea what r they talking.. their voice like ....

Dont get any as well, conclusion is white people aint that cool.

thanks bro
dont know what was i doing just now

actually me either but we just need to see what are they doing

it is also a good idea to get more airflow

This post has been edited by ham_revilo: Oct 19 2008, 03:11 AM

Really "pek cek" trying to remove the metal mesh. Straighten all the hooks but still can't remove it. Do I need to remove the chrome part first? That one I'm still figuring out how to remove -.-

u really have to make sure all the hooks are completely straighten... take note there are lil tiny hook around the usb, audio, esata port... if all is straighten then i think shouldnt be a problem bro....

the crome part u want remove or not also can...

This post has been edited by ham_revilo: Oct 19 2008, 04:53 PM

I give up ._. Broke one of those already. A few more look like it is going to break. Yeah, I adjusted all to straight... only some parts came off. Even straighten those at the IO there. (Those were easy since they're pretty short.)

Well, I sort of colored the "white" color parts due to the broken plastic to black. Not obvious already . Especially when I didn't use blingbling fans on top.

Oh and airflow really increase a lot! Can feel the air now! Back then can't even feel anything =/

This post has been edited by celciuz: Oct 19 2008, 05:39 PM

hi CM fans......!!!
wana ask here, will CM hyper 212 fit into CM elite series casing..(335)?

bcoz i gona match up hyper 212 + elite 335.. so beter to be comfirm 1st..
as i study frm elite manual,, thy can fit in 166.6mm height de cpu cooler, is this rite?

if this r rite, thn should be can fit in hyper 212 with 160mm (H)

Do you think CM will make a something that own Casing cannot fit in? Elite unless you getting M-ATX then hard to say

worry aft get it thn cnt fit,, thn will waste lor money.. so nid do survey 1st..

yes i believe it can fit.
agreed with regentcid also.
and from the manual also u had got the answer already.

yaya.. i got the ans there.. but thn my fren told me if i take the transparent side panel it maybe will crashing there.. .. bcos transparent panel is tapping frm inside to the side panel,, so it will eat few mm width there..

hopefully it can fit in.. and let me to build thm up...

if got any1 is using elite n hyper 212 plz post up picture here ya.. thx..^^

Wah see urs looks like u manage ur cable very good ar & u mod the case a bit, if compare to mine haiz, sad la for me

Anyways last 2 weeks ago I do some cleaning @ my casing (I didnt have battery to operate my digi cam that y didnt post it up soon all used up by the 360 controller) coz 1 2 install some new fans & ram & a TV tuner I bought
In the process of it I remove my previously install heatsink too which is the CM Sphere becoz way too dirty @ the fan part(wanna go use the air compressor to blow it).

Bellow is the Before & After pic, well guys do give some feedback what else must I do to to the cables, haha

Before



After

i see worms everywhere man need to improve on cable management

Yeah still got worms , haiz I think next cleaning I going ot do only do the management again
I wonder how i going to hide the power cable wire for the later on 9800GTX+ card I going to get,