wana ask something bout Achilles, ist i can install using crossbow ss kits on AM2/AM2+ socket in any blowing direction rite?

*blowing backward/top

This post has been edited by cdlim87: Dec 27 2008, 03:42 PM

nope, i mean the way we mount our HSF... if i use crossbow ss kits should be can mount for both blow direction (upward/backward)..
if use the stock clip on AM2/AM2+ socket for mostly amd mobo will make it blow upward only...
---------------------------------------------------------------------------------------------------------------------------------------

Wat i wana make sure is xigmatek cross bow ss kits


1. can use on AM2/AM2+ socket?
2. can use 2gahter with Achilles?


thats all... thx....

wat i mean is wat had done on DeepCool product, their copper heat pipe is stain with nikel( if not mistake)

u not worry ur copper will oxide ar? ltr ur copper heat pipe bcome ''black edition''

but really to say la, sometime cnt totally blive wat thy done on their review too, coz we dunoe their testing bed... ist every time almost the same or wat...
so the most exact is wait some1 frm LYN do the review..

can u post ur mobo photo here for reference?

owh.. this 1.. really quite prob leh... other user gigabyte EP45-UD3R,
he mod the kits to fit in his KW with his mobo..
reference link>> http://forum.lowyat.net/topic/777616/+138
the warranty still ON, this is the good news frm DeepCool to him...

vote for xigmatek 1283/1284
1283 can take normal version or RS;
1284 can take normal version or Achilles

both of thm use 8mm heat pipe and HDT tech; hyper 212 is 6mm heat pipe

---

Added on December 28, 2008, 8:16 pm
BTW, by the theory of fan CMF, thy should class like this:
DK s1283 > RS s1283 > HDT s1283

DK 89.45CMF, RS 61.375CMF, HDT 56.3CMF


This post has been edited by cdlim87: Dec 28 2008, 08:16 PM

yep.. can say so too... but the noise of delta fan will make u

mayb ur CM690 top exhaust fan work as well as back side exhaust, thats y not much diff kua...
if other casing dun hv top exhaust will see a large diff mayb...

can share a bit wat fan u use for top exhaust and back exhaust??



This post has been edited by cdlim87: Dec 28 2008, 11:41 PM

with psu as top exhaust is totally not enuf to handling it, sure will not work as well as other top exhaust fan..., as the psu fan not so high CMF, and it is still hv a room infront psu that will trap the hot air there... unless mod the casing



u r using fan speed controller by CCF? or u direct plug into mobo...??

if u plug into mobo directly, mayb whn u turn on the 1st fan, the cpu temp drop and make the CCF rpm drop?? this is control by smart Q fan inside BIOS (**mayb )

bad thermal transfer?
if u using fan controller, u try slow down the CCF fan speed to minimum for few min, thn try with max speed, see any large diff there....
if no diff the mayb is really bad heat transfer frm ur proc to CCF, but i blive this will not happen..

eg like the red rectangular is our cooler, blow top, thn will part of hot air can blow to psu to exhaust out, but still got another part will trap front of psu there...
unless we mod our casing, add-on fan there, these may help in hot air exhaust...

js got IceBlade PRO....
js knew that it cnt mount in blow backward, only can blow top for my M3A78-EM (AM2+ socket)

now every thing try on nake... will move to its new house soon(CM690)
aft try and get result will posting here.. dun worry...


-----------------------------------------------------------------------------------------------------------------------------------------

@celciuz

if u ur fan slow down, the HS still in cool(check the temp too) thn that is really coz by weak heat transfer between proc and cooper base..

but i blive it is not la.. mayb is sensor prob or software prob...

but u say ur CCF touch with other HS rite, will this make ur CCF not enuf tight with the proc?

if possible try post here some photos how u say the other sink(NB+GC HS) is touching ur CCF...

3210MHz



cdlim87/ DeepCool IceBladePRO/ Tuniq Tx2/ AMD athlonx2 6000+ @ 3.21ghz(7% overclock)/ 1.39v(loaded), 1.424v (idle)/ stock fan + CM 120mm (69.69CMF*pull)/ 39c/ 53c/ non-aircond/ ORTHOS




This post has been edited by cdlim87: Dec 30 2008, 04:14 PM

delta super high CMF fan = super high noise...
wat i dun1 is noise.. this combo fan not bad... stock fan 1500RPM max(if no mistake), CM 120mm (69.69CMF) 2000RPM max,
so, the noise is vy low even running at full speed

• 
  for sure u need pay more for the high performance fan, if u r tight budget mayb go to garage sale looking for a 2nd'hand unit..
• 
  IceBlade PRO & CCF both come with fan clip, thy can supported to any 120mm x 120mm x 25mm fan..
• 
  diff btween CCF and IceBlade?? this u need looking up for the review doing by bro coolice,
  if not mistaken, CCF perform beter thn IceBlade, but IceBlade can do push-pull to improve the performance
  both HS hv their advantages... depended on ur own budget and which 1 u like..

p/s: i will post other result aft this, u should noe athlonx2 6000+ is 1 of the heat monster,
but u can refer to my result how the IceBlade handling the temp..

* dun hesitate to ask any question here, feel free to ask any ques
as long as the ques can be ans, there will be ans for u..

This post has been edited by cdlim87: Dec 31 2008, 01:54 AM

thx for updated... happy new year..

yeah.. will post here aft get stable OC

to be sure lo bro.. he use 1x ORTHOS ONLY... for x4 proc need use 2x ORTHOS to make it full loaded..
or js use OCCT will loaded for all 4 cores..

if rajin, can la use 4x sp2004

ya... it oni use loaded 2 core frm ur proc, thats y is 50% only...
yup try it out , thn repost ur result..

Vcore 1.85v ..!!!!!!!!! ist real..!!!!

edited:
1 more things is u atleast need post 20mins stress of ur proc result, not 10mins, not 12mins, not 19 mins, but minimum 20mins

This post has been edited by cdlim87: Jan 4 2009, 09:29 PM