but i've already sticked the backplate to the mobo ,anythg i can do nw?

---

Added on February 14, 2009, 6:27 pm

see the white plastic thing on the backplate?

This post has been edited by ZeneticX: Feb 14 2009, 06:27 PM

but the thing sure damm hard to take off now since the double sided tape is strong and after i take it out and want to stick bck,use wat?

and i cant find any info wheter its paint anot,but the backplate got a matte black finish

This post has been edited by ZeneticX: Feb 14 2009, 06:40 PM

and to take it off?i heard b4 theres a way use hair dryer 1

because paper is not a good (or should i say nt at all ) insulator for electricity?primary school science

i jz realized it ytd after i saw the plastic thg on my table and flipped bck the manual to check it out what is it i was "eh,why the picture show this white plasticky thing on it when it calls me to stick to mobo".luckily i havent throw it yet,keeping it nw for future when i remove the backplate

im running at 5:6 ratio nw @ 1094mhz using the 2.40B multiplier.tested using memtest,so far so good

whr to dl a free version?i can only see trial version at their website

ok so now im in it.where do i start frm?

oh yes.nice and quietly .so tools > cache and memory benchmark?

lol the test is faster thn i though.here are the results

btw this thread really turned frm air cooling discussion to rojak oc discussion d

This post has been edited by ZeneticX: Feb 15 2009, 03:18 AM


Attached thumbnail(s)

Here's mine

ZeneticX/Xigmatek Archilles S1284/Tuniq TX2/E8400 @ 4.1Ghz/1.31v/stock fan/43c/72c/LinX/no air cond

they wont stay long at 72 or 71c as they will quickly drop back down to 68/67c but i posted it as well for the max temp it can reach

and i've increased bck the vcore to 1.3125v bcoz at 1.27/28 LinX or even Prime95 keep giving me errors after the 1st or 2nd minutes maybe its due to the rams?

nope.i complete the 5 rounds LinX test with no errors

sometimes its strange for Prime95,only 1 of the test will show errors (means 1 core) and then the other core will cont

yep small fft test

they're hell lots of voltage options in the bios.i heard its new in p45?

Load Line Calibration
CPU VCore
CPU Term Voltage
CPU PLL Voltage
CPU Reference
MCH Core
MCH Reference
MCH/DRAM Reference
ICH I/O
ICH Core

and do u enable back virtualization and C1A2 after oc?pcie clock remains at 100mhz rite?i hv EIST and C1E enabled bck


are lian li's case fans with led good and bright enough?i see vry little ppl selling them here in lyn,oni got lian li casing

This post has been edited by ZeneticX: Feb 15 2009, 08:37 PM

maybe he's using stock cooler?my e8400 b4 oc and on stock voltage idle 33-35c with my current cooler.after oc idle went up to 39-40c.

btw nt recommend to open ur casing hlaf naked la,unless u rly no choice (which is the case with my previous prescott).bcoz open up side will invite more dust,in the end will hamper ur airflow as well

lol i'm poisoned by these lapping technique will try out 1 day whn i have extra time to spend

hey ya long time no post in this thread .update my scores a bit

ZeneticX | Xigmatek Archilles S1284 | Tuniq TX2 | Stock Fan | Intel C2D E8400 @ 4.1ghz | 1.365v | 41c | 73c | non aircond | LinX