yep linX.so i set to 10 runs and clicked the all button.wish me luck

complete 10 rounds without any error.highest temp reach is 70c,sumtimes drop to 67c or lower thn increasing slowly after tht.



will my oced clock value retain after i shut down and turn on my comp the next time?cause i only oc to 3.6ghz frm the bios,frm there onwards i use easytune6 to oc to 4.1ghz

This post has been edited by ZeneticX: Feb 14 2009, 12:06 AM

frm the 1st page theres some who have better temps using this cooler,maybe i apply too much or too little tim .not a big matter anyway,as long as its not too high

lazy for now have gone thru tough job ytd nite installing the cooler.maybe after i have a mood to do so thn i will reseat it

and i wont be running any application tht would use the proc to 100% long enough,except for games like crysis,far cry 2 and ut 3

btw my ques frm the last reply



This post has been edited by ZeneticX: Feb 14 2009, 12:16 AM

u mean the vcore?i set it to 1.31

im following this guide as im still a noobie to oc ,dn wn to take any risk

nt yet though of selling it as off now

stock value would be 1.25v?

will try and brb

ok so i decrease it to 1.25 jz nw and i got a blue screen while loading windows .increased it bck to 1.31 and im bck here fine

will do

and is it normal to downclock the ram after we oc our proc?my ram was used to be 1066mhz but nw its running on 912 mhz

er 1:1 divider?nvr heard bout it.can more detailed bro? and i thk we're really out of topic d.this is air cooling thread pls pm me

yeah i noe bout tht but there's this GMCH strapping with A B C D.does it matter?right nw im using 2.00D,i tried setting it to 2.66 which is the second lowest value but tht would make it 1212mhz

This post has been edited by ZeneticX: Feb 14 2009, 12:54 AM

456 x 2.00D

912mhz

maybe there are but it wont be at D

i would try to get answers frm hardware ques.this (G)MCH thg is confusing

topic posted.

much thanks to you for guiding me over 2 pages in this thread

This post has been edited by ZeneticX: Feb 14 2009, 01:06 AM

noted and will refer to u once i make up my mind

btw decrease vcore to1.275 and started fine

This post has been edited by ZeneticX: Feb 14 2009, 01:14 AM

im not so dare to try out those latches as i've heard tht it will make ur system go unstable if u set it wrongly

wil try out those latches 2mr while i google more info bout them.thks for all the hlp here

is it ok if i straightly oc my ram frm the bios?nw im at 2.00D,so i assume D is stable.set it to 2.66 and i get 1212mhz rams

NB voltage?i guess not,bcoz so far i oni mess with the vcore

i thk i'll leave this ram thg to what it is now 1st until i get more understanding of those latches or strappings.wont feel much diff oso less 154 mhz frm previous setting

This post has been edited by ZeneticX: Feb 14 2009, 02:35 AM

oh shoot i realize i did a small mistake while installing my crossbow backplate .i take off the white plastic thing cause i though its part of the double side tape.not a big matter is it?