http://www.aeolus.com.cn/English/file/product.htm

---

Added on April 3, 2009, 7:36 pmany review for copper KW compare to cm V8? coz the price range is almost same, im considering which to buy

This post has been edited by bluesoul: Apr 3 2009, 07:36 PM

Which is better fan for my killerwhale...Panaflo or the new Cm silent 90cfm? 0_o

Im using CM90cfm fan with my killerwhale. Looks nice and good temp.

sanyo denki

the noise is gonna kill you

compare northbridge 6 and northbridge 8 which is better? to have fan or no fan?

Btw will changing northbridge stock cooler form gigabyte void the warranty?

My northbridge heatsink is kind of warm

How warm?

northbridge 8 better but more expansive. Changing any stock heatsink will void warranty for sure. But ppl change back to stock cooler and send for RMA. Unless u oc, else no nid add fan to them.

---

Added on April 20, 2009, 10:03 pmnow my norbridge goes up to 90C without fan with stock heatsink. Now no money to change heatsink so I added a 70mm to help cooling down. it is around 50-60C on idle now. I never oc but the intergrated graphic is generating a lot of heat. previous i use graphic card never got overheat problem but now must use fan or else hang very often.

This post has been edited by hiroki04030: Apr 20 2009, 10:03 PM

I thought of buying this cooler but i am afraid that this cooler wont fit in my casing. The cooler in this photo http://forum.lowyat.net/index.php?act=Atta...=post&id=612450 looks big . What is the dimension of this cooler?

This post has been edited by xeon386: Apr 24 2009, 07:03 PM

if u dont have side panel fan, i think it will fit most casing. ive own it before and now using true 120. with my true 120, i cannot close my casing wif side panel...

what casing u using? i have side panel fan

This post has been edited by xeon386: Apr 24 2009, 10:05 PM

killer whale can fit in most casing...i use cap ayam case and killer whale ...and ur side panel fan need to be removed i guess, if not cannot fit in(depends on ur casing oso)...the distance between my cooler and side case is only few mm... = =

This post has been edited by gnush85: Apr 30 2009, 09:23 AM

anyone have fitting problems with this cooler and ep45 ud3p?

This post has been edited by lurk3r69: May 25 2009, 07:04 PM

You have to grind the edge of the "H" steel bracket a little to get it fitted cause the mosfet heatsink is blocking

This post has been edited by kali65: Jun 1 2009, 02:02 AM

are u very sure of this? i tot this happens to ud3r only? altho i know ud3r n ud3p boards r similar....but i've read some say no problems wif ud3p? just wanna confirm. thanks

i happen to use deepcool killer whale on Gigabyte EP45-UD3P, when i align the "H" bracket to the 4 point mounting holes during installation i found out that the mosfet heatsink is blocking approx. 0.4mm, so i grind off approx. 0.4mm on the two round edges of the "H" bracket to get a perfect alignment. Not such a big deal for me though, performance wise is impressive, E8400@4.00 clock speed running on 1.36Vcore with idle temp of 32c and load temp via linx around 60c.

http://img.photobucket.com/albums/v514/coolice/forintel.jpg
http://img.photobucket.com/albums/v514/coolice/forAMD.jpg

The H plate design u posted will definitely fit without problems if they do replace them, the one i have needs grinding though because its a 2 in 1 bracket (LGA775+AM2 combination).

This post has been edited by kali65: Jun 1 2009, 02:25 PM

thanks bro for the advice.

any icebladepro user here?