congrats to V4!!

anyway can i join here?
i'm using waja 4G18 (a) year 2003 i think

mod to my exterior..
i) mix bodykit change
ii) colour change
iii) 17" sports rim

performance mod
i) everco s-flow muffler
ii) c-grounding
iii) pivot VS

thats all for now.. thinking of modding other
stuff but no budjet yet.. huhu

Plum crazy colour kinda deep purple
colour very close to persona purple
from far maybe look same but into details abit diff
actually when my car come out from paint garage persoan also
comeout... few days later drive shocked see 1 persona use same colour
but actually ori colour from kilang...

front using the new waja plastic bumper...
rear using evo 9 bumper
side using bmw type 1

btw ur using K&N air filter rite?
in term of cleanliness and performance good?

---

Added on August 31, 2008, 12:29 ammy ride

sharing is caring

This post has been edited by mao2: Aug 31 2008, 12:29 AM

hehehe.. no lah.. if u look carefully
the front tyre is resting on kinda ramp...
my house going in got little diff. in level
this pic actually taken while test to see hit or not
coz i juz lowered my ride that time.. hehe
camera trick

Hmm.. I don really know how much for the paint job
coz... that time i when i send to the paint shop
got dent all over my car - hood, door both sides, rear bonnet, roof also 1 of my rear lamp broken
so all with ketuk n change lamp + paint job is around RM1.9k

---

Added on August 31, 2008, 9:04 amAgree.. but depend on the weight of the rims it self
if u can manage to find a really light weight sets of rim
FC + performance wise is good... plus the looks.. ehehe


what size r u aiming for? and if the replica one usually is heavy.. u hav to go to klang area
there sure u can find many shop selling local and imported rims.. new and 2nd hand
i got mine 17" light weight at Kazuto garage for RM1.5k plus my ori rims sell there for RM500 - tyre 60%
many shop there... good shops to... Rim Hunt!

This post has been edited by mao2: Aug 31 2008, 09:04 AM

actually mine is used.. but the previous owner use the rims just for about 4 month..
then change into sumthin else.. the rims around RM900++,
also tyre is 17/105/45 simetyre - astar 300(this type considered good quality bcoz also sell at continental shop)
around RM230/pc.. plus all other stuff and nut, chin-chai RM2K then trade ori rims RM500 = u do the math

lowering cost me around RM300++ sumthin as i just change the springs into R3 sets.. install+fix here there+alignment
if install at proton need add another RM100
hehe.. no money for adjustable.. small budjet calls for little mods..

---

Added on August 31, 2008, 2:22 pmWho want go do mythelogy LCP? can i join?
we do group installation maybe can get cheaper.. where go to do?

This post has been edited by mao2: Aug 31 2008, 02:22 PM

R3 springs are design for standard absorber as for respective proton cars...
so the absorber will less longer.. this spring also give great comfort while driving
GAP is considered good to.. the other one is eibach spring also considered good
in term of comfort and stability when cornering.. some would suggest tien but never hav experience or
story from any users as they would go for adjustable for tien
lowered ride give better lower center of gravity
to the car thus more stable and wont 'buang' when pek corners..

Tainted & MOMOchacha =
those R3 sets off spring are actually RM450++/set i dun remember the exact number
but early 2008 there was a promotion done by the R3 store selling lot off their part almost 40% discount
there are some list out in the web.. but recently cant seems find 'em
i bought them for RM260 and when i called the sales person said only spring are available (at that time)
Try calling this number to ask if the stocks available and still promotion... Daryl - 012 2131691 (R3 sales person)
i collect them myself at proton main near kesas... add RM150++ for installation i think if done at proton..

Urmm about the grill.. its a Promote grill as for waja
this one i DiY myself.. bcoz if u just wan buy- it cost u around RM200 can find it at D.1 custom at sunway

BHL is one of 'em that r good light weight rims..
but if ur aiming for the likes of VOLK, ADVAN, ENKEI etc.. u hav to find the japan ori ones
those are really light.. but cost u abit..
coz if ur go for replica for those.. sure damn heavy
K-II is actually ADVAN RG ver. 2.. but those were not made in japan, made locally
thats y it is not that light..

if any of u guy wanna go for LCP inform me.. like to join!!

---

Added on August 31, 2008, 8:37 pmhere a clearer pic



This post has been edited by mao2: Aug 31 2008, 08:37 PM

actually what i meant is that at the D.1 shop if u want they'll custom make for u
and it is RM200.. thats y i DiY my old grill into this design.. hehe and it only cost me around RM50 or so
and actually the original design off the grill abit diff.

the original design

taken from dunno which auto show

if u guys want i can post pic how to DiY the grill..
very easy actually.. but cutting the black thing need a little hardwork
coz took me a week to cut, adjust the shape and all
but it worth it

This post has been edited by mao2: Aug 31 2008, 11:06 PM

all the bodykit is depend on wat u chose to fix to ur car...
if just skirting from front to rear abit cheap.. but if change
sets of new front + rear bumper + skirting see wat u chose determine the cost
also material PU or fiber..
and if u wanna paint the same colour as ur car maybe cheap
mine paint cost for bumper (front & rear)+skirting around RM400++

if u really want cheap.. search for ppl that are familiar about bodykits
like in other waja forums and ask them to buy/get for u.. sure up to 50% cheap... hehe

---

Added on August 31, 2008, 11:34 pmSilver arr?? Black or bronze.. hehehe just my 2 cents

This post has been edited by mao2: Aug 31 2008, 11:34 PM

hmm.. to me.. ok la.. since my fren silver satria use white 15" work emotion
but his car's colour silver abit gelap.. so kinda match i think
but if ur going 15" i think darker colour rims is nice.. coz usually smaller size rims look nice
if dark colour so that it wont look to small like this


my brother's 15" SSR 15/105/50 bronze colour

urs 15" ar? thought ur using 16".. huhuhu.. 17" what kind ur aiming for?

what do u guys think? nice?


i like the bumper.. only the subaru nosing spoil the face of the car..
but the bumper seems garang

that bcoz it Fasting Month Ramadhan so got songkok on top emoticon

---

Added on September 1, 2008, 2:10 pmno problem.. but need to find those pics 1st
so until then.. hmm.. i think can open DIY section.. huhu
all kongsi2 idea..

This post has been edited by mao2: Sep 1 2008, 02:10 PM

Yup rims are like pisang panas.. one time u see
the other day u wont.. if u really want.. just make a 1 day trip go too klang
i could bring u too Kazuto ask there.. there got good ones also if ori rim can trade around RM500 if no bengkok

if K-speed must be 5 hole? izzit? or diff. pcd?
but heard from a fren nowadays got conversion thingy.. PnP i think
from 4 holes 114.3... to 5 holes
but not sure where or how to get it

what high value r u referring to?
16 what brand? if ok2 dun change lar.. unless u can find
original japan rims ones.. those r really value for money use one..
light weight, and durable..
but RM4k++ meh.. not with tyre..

haha.. lots of japan rim all around that price
i'm aiming on Advan RG.. but not easy to find 4 holes one
that day got i fella selling 17" with 4 hole pcd 114.3.. but last nite search again no more.. huhu
now no money.. cant buy also if hav.. RM4k is alot.. hav to bukak tabung just for the rims.. huhu

hehe.. bro squreball.. also wanna see ur bodykits can?

---

Added on September 2, 2008, 1:28 amFrom an experience waja owner who likes modding :
"what tranmission is ur car?..auto/manual?..
please understand that transmission does effect your mods settings as well as ur piping setup...
not only by installing headers will improve,but it must comes with good piping setup,good piping setup is depending on what transmission is ur car..also,u must upgrade air intake system as well..."

hmm... as for the cat-con.. lots off ppl hav done removing it.. yup it does giv good push to ur car
as the air is flowing with not much obstacle.. this is for straight flow manual tranny coz manual don need much
back pressure.. and about the sound.. it would be noisy.. since these is where the cat-con or CCR work
CCR - Catatylitc Converter Replacement = either mid-box or bullet
they are use to creates back pressure and lessen the sound coming out from ur muffler..
mean while if ur using Auto tranny u need the back pressure or not u lose low end torque.. and cost lots of FC
this is the only thing i know.. correct me if i'm wrong coz i'm not really good... just my 2 cents

This post has been edited by mao2: Sep 2 2008, 01:28 AM

hahaha.. i agree
actually if u wanna do exhaust system..
better u go to a good exhaust shop like hotbit, everco, powerzone etc
do a whole set system change...
extractor/header + piping + bullet/midbox + muffler
cost u abit lar.. around RM1K++ depending which shop ur go do
but u dont go pening2 on exhaust..

wow.. Lenso good choice.. and with continental tyres 3.4k sumore
hahaha.. dunno when can get my dream rims.. hahaha