DiYing ur grill 

Stuff to find :
i. flat black high tempr. Spray (optional as its ur choice of colour)
ii. for the plastic cover i use those white motorcycle plastic body.. (kepuk)
    u can get it for Rm10.. using honda cup c70 one can buy at motor spare part shop
iii. diy grill mesh can get at accessories shop
iv. any small saw.. as i'm using steel saw (handy use)
v. pengasah thingy.. to smooth things up few of sand paper also
vi. strong glue.. plastic or pvc glue.. high tension double-sided tape also can

Here's how..
i. cut the 2 lowest line of the grill.. there is 5 lines
  it should be like this





ii. the take the diy grill mesh.. and measure the area where the previous line had been cut
    using paper or paper board.. this is to get the shape right
    then place it on the grill mesh cut into the shape... its a try and error
    until it is well placed





iii. ok.. since the grill hav 5 lines.. now too cover the other 3
    using paper or paper board measure and get the shape right and cut it
    try to put it on top so that the angle and shape will cover most off the 3 lines
   

   
    then draw it on the plastic kepuk.. and cut using the saw..





    there maybe not straight or certain angle wont fit.. so just grind it
    also smooth the edges so it looks nice and smooth
   
iv. then paint.. u need to sand-paper the plastic surface 1st so the paint will stick



v. then glue all the stuff to their places right.. i just use double-side tape like the one
  those accessories shop use to stick the bodykits to the car..

then walla.. done