Good good.........Finally see you stable@480FSB
Keep up the good work,lengchai koko

man u me tempting lar -pws-

Hi DFI Lan Party Owners...

its my fisrt time hold a DFI Lanparty 790FXB mobo...

i have a noob question here guys...

the mobo oc things are diff from other mobo...need to do homework before start oc using this mobo...

he he he...

i have increase the vcore for the juice (1.45v)...

plus increase the fsb to 230 only...

and drop down the multiplier till 13X....

drop down the ram divider to 667...

vdimm 2.00

then wut happend??? guess !!!

the mobo cant reboot...when it reboot...the screen blank...and nothing appeared on the screen...

i have to press the reset button again to reboot it back...then it will boot up like normal with the previous setting...

is this a normal behaviour using this DFI Lanparty ???

guys kindly help me out on this...im not familiar with DFI mobo...

i have run orthos and other OC and stress test application...it was stable...

but why everytime i press restart button,the screen turn blank and it wont boot up...i have to press the cpu reset button to reset it back...

then it be able to boot up...



This post has been edited by verdict: Nov 6 2008, 05:11 AM

Please list out your hardware. Everything except LCD.

Try lower down the vCore.

-pWs-

okay dude....here are my setup...

Proc: AMD 5600++

PSU : Silverstone 560TF strider...

Cooling Kit : Thermalright cooler...

Mobo : Dfi 790FXB...

Ram : C.Ballistix Tracer 4GB kit....

HDD : WD 160GB SATA ....

ROM : Samsung DVDRW+-

btw if im using default setting which is the fsb is 200 and the multiplier were 14X....

I only increase up the fsb from default 200 to 210...

and same thing happend....the pc wont boot up...urmmm....

i have to press the reset button once again to reboot it back...



This post has been edited by verdict: Nov 6 2008, 04:46 AM

Please refer to AMD® Socket-AM2&AM2+ Overclocking V11
http://forum.lowyat.net/topic/809974

Attach a copy of CPU-z CPU, Memory & SPD tab.
Provide hardware information there too.

-pWs-

Bro...no need to copy it...

i just wanna know is there something wrong with my mobo...

or is was normal if using DFi mobo...

that all... i wanna seek some answer only...

and not posting up my oc result...

This post has been edited by verdict: Nov 6 2008, 04:45 AM

I dun think so it is motherboard problem.
It is more to instability of either proc or ram I guess.

That is why i requested to have you upload those CPU-z info.
-pWs-

Please refer to AMD® Socket-AM2&AM2+ Overclocking V11
http://forum.lowyat.net/topic/809974

last time im using asus crosshair mobo...

i only changed the mobo...

its weird,like i told you before....i only increase the fsb to 210 only...

and it cant boot up...i have to press the reset button once again to reboot it back...


later i will upload the CPUZ info...

aghhhh!!!!



This post has been edited by verdict: Nov 6 2008, 04:51 AM

Bro,

Please bear in mind that overclock is not depend on HTT solely.
HTT, HT Link, Ram Frequency & Timing.

You have to know how to read the table (AM2/DDR Divider)

There are a lot of reasons why cannot boot.

1. vCore not enough
2. vDimm not enough in combination of ram speed & timing you use.
3. Weird case like divider problem: I believe it wont happen to your motherboard.
4. Ram slot: Some yields better result w ram slotted nearest to CPU.
5. MAL: Some rams just cannot take tight MAL.


You are take for granted that no problem when increasing less HTT.

-pWs-

And lastly, I ask you to seek help at that thread as most of users here at this thread are Intel based.
Not showing your overclock result.

Thanks.

-pWs-

Dude...i know that stuff bro...

its weird lor,everything was set up to default...

and i just increase the htt only by 5...its supposed can boot up like normal...

vdimm and vcore are stated at default setting...

if im using the asus mobo...5% increasement wont have any effect like this scenario...

thats why im asking you dude....i have no idea seems im noob using DFI mobo...

lets make it clear...

i enter bios with default setting...

go to fsb and increase the fsb to from 200 default to 205...

then save it...reboot and screen blank...

so i press the reset button....it boot up like normal with the 205 fsb set on it...

log on to windows....i press restart button...the cpu reboot and cant boot up...the screen blank...

then i have to do the same thing again...press the reset button...

This post has been edited by verdict: Nov 6 2008, 05:08 AM

Try bring down your ram divider (667Mhz) and see.

-pWs-

dude allready done that...

drop down the ram divider oso wont help...that why im asking you guys...

is that a normal behavior on using this DFI mobo???

My last DFI on AMD never give me such problem.
Now it is more like motherboard issue.

-pWs-

Urmmm...btw thanks dude...

thanks -pWs- for ur help...

i will directly send my mobo to the right person...

thanks for the help...

Ask the fellow to test it for you.
If can, w your hardware.

-pWs-

Guys, can anyone tell me which one is the latest official bios for P45 T2sr plus? to many bios at dfi website, not sure which 1 should i use

October is the latest stable BIOS.

-pWs-

yup tat true bro....