Is that any specific type of fan for 9 feet ceiling high need? Or a standard type with do???

Just back from ECO Home Show at Sunway.

DEKA fan price as state at the price tag

Q8 : RM 399
MXL : RM 389
Q7 : RM 349
X1 : RM 399
MX3 : 289
X6 : RM 159
M5 : RM 199

Price can further discount base on volume...

I asked for 4 x Q8 / 4 x Q7, been quoted RM 2650...Is this good?

---

Added on March 20, 2011, 1:28 amOrder below at the ECO Show

DEKA

Q8 : RM 340 x 4
Q7 : RM 268 x 3
X1 Chrome: RM 350

total of 2514

But after ordered, been informed that those remote control type of fan need those specilist to fix and adjustment included on Balancing. As the way it fix not the same as traditional way.

Example: The motor part need to fix at the hook, than only fix those blades up, else it will be swinging and make sound after few days. Where the traditional way is fix already on group and bring up and hook.

The specilist will cost another RM300. Is that true?



This post has been edited by Jo_da48: Mar 20 2011, 01:28 AM

Yes...the "some kind of magnet included" are important....and I have check with my contractor, he said No Problem lal except your fan is trouble market and different that other manifacturing... and he will do according to the book if want, include fix the motor up than only the plate..

Perhaps will let him try one...after my new house ready on 2 months time.

Not the price increase. the X1 have two modal hence two different price.
But sorry as I cant recall what the different....

End of month that will be Home Deco...get from there..,
Just show them what outside salling and they will give the price lower...
http://www.homedec.com.my/KL-ExhibitionDetails.html

Anyone have latest Deka price for below?

Q8
Q7
X1 Chrome

* Thanks

All,
Besided baby fan, what out standard size on Fan outside there? I know it have 58 / 60", anything around 58" <=> 48" and which brand are there?

I'm may in trouble as 60" may too near to my wall due to centre point of light

You need something like this, even without the hook you need the wood...

Friend, this is how the plaster ceiling folk will do. If you tell them that will be a Fan, that wood plus wood together, if you tell them it will be a light (not downlight) he will also put a wood there except you alreayd know what type of light, because they worry that the plaster ceiling metal can't support it

At this point, I have around 8 light point installed with wood, so that I could just use it when I want , else once the plaster ceiling fix in, it will be hard to get wiring or wood in place.

9 FT? It already good lol with fan it will bring down to 7.5 - 8F, maybe you want to put a Dome or Centre Ceiling or make a small square box to jet another 3inch up?

what the standard length on Fan? As I noticed that most of Deka Fan is from 56-60 inch, which bit long right?

Are you modal having timer type or just the remote control? 2) Have you read the manual?

Remote control function with 1, 3, 6 hours timer, speed control and sleep mode)
http://www.kdk.com.my/product/?p=298

just post your modal out too, other member may able to advise if they using same modal lol../.

Any rule that the Fan plat need away from ceiling how far?

Because the Deka Fan I plan to get are 60" inches (152 cm) Diameter, which only leaved less than 6inch from the wall...

Green Never be cheap...

Material of building the fan are...
http://www.haikufan.com/content.php?id=9&lang=1


This post has been edited by Jo_da48: Oct 26 2011, 12:50 AM

Anyone could shared price for below?

Panasonic F-M14E8 / F-M15E6 / F-M14C8WT?
KDK K15Y6 (V Touch) / Sensa 5 (K15Z9) Sensa 4 (K14Z9)

Below is what I found from this topic
1) Panasonic F-M14C8WT (RM238)
2) KDK K14X8-CL (RM280) K14X8-GY (RM2255)

Due to my lower ceiling, most Deka ceiling fan that I plan to purchase cant fill in anymore, as it almost touch by my hand as the Fan length from Pully to PCB COver are almost 48cm instead of 44 cm in the specification. That worst thing the Deka WEB even indicated was 32cm only
Now I have to see for above fan which 30.6 - 40cm lenght

If not mistake normal on panasonic are 44cm (17 inch)..http://www.panasonic.com.my/wps/portal/home/products/homeappliances/electricfan/ceilingfan

9-9.6 feets will make the fan look low

This post has been edited by Jo_da48: Nov 7 2011, 12:28 AM

ANy cut on the tube and leave what gap before touching (1 feets)?

My room was around 9.4 feets, if put the X8 (48cm) it only leave me around 5 inch gaps, is also will give me a shadow on my downlight (one of the room) as the plat too low

Maybe I feel unsafety if below 1 feet when i raised my hand
My electrician will try to look for 6 inch tube (original 1 feet) for me.

Or anyone have good recommendation place and good quality place that I could puchase the Pipe?