@creep

tie all those cables in a big bundle and put it somewhere near the cd-rom bay area. you can also place the cable behind the motherbard, i mean near the right side panel.

the shortest route of cable to your componenet is never the best routing method because it will make the cable "crawl" acros your motherboard...thus looks messy. try to route it nicely as if you were making a road. this method requires you to have sufficient cable length.

Hi, can anyone advise me on how to route the cables at the back? I mean like, I've 6 fans inside my CM690, and the molex always "kacau" when I try to close the door at the back...

Or any sifu can show some picture of their rig's other side? The back where all the wire are hidden.

haha....yea lor....i change my rig every 3 months so never bother abt the cable management....now only want to concentrate

---

Added on October 17, 2008, 9:59 pmactually i'm looking for that thing u all used to tie the cable.....who's selling it ?...tried searching at All IT they only got that yellow cable where they used in supermarket to tie the plastic bag.....


This post has been edited by creep: Oct 17 2008, 09:59 PM

have u try take a look at SriComputers?

@creep
change rig every 3 months? rich guy spotted
anyway, at least hide ur cables in unused cdrom bay, luckily that the cables are sleeved, otherwise it would be messier

haha..sure rich ni.. maybe own a pc store joking bro.
yup,agreed.use the unused cdrom bay.
use cable ties,tie the cables nicely, and put it in the bay.

Creep's rig is a disaster. a makeover is recommended.

thanks to all for the feedback....gonna pimp my rig soon...

This post has been edited by creep: Oct 18 2008, 03:59 PM

I saw this picture of CM690 on another forum.




Very nice job indeed. I noticed that he has one molex that can connect to two fans 3pin input. Is there something similiar sold here in Malaysia?

yes there is... easiest to get would be the one from zalman... http://www.zalman.co.kr/ENG/product/Product_Read.asp?idx=224

can get in ALL IT low yat plaza... but its expensive... RM17 or something like that....



black plugs is for 12v and white plugs is for 5v.

seems like tat guy using HX power supply kinda easy to fold those PSU cables

uglyvamp selling them.

and i think the user has a modular psu.

This post has been edited by chyu89: Oct 18 2008, 08:57 PM

yeah from the cable outlook it HX series psu..

@celciuz
go find uglyvamp..he sell the cable u need

All comments are welcome.Still noob in this cable management

Before cable management


After cable mangement

@ezzad,
nice, u got improvements there
but i like it better if u straighten ur sata cables.

@very nice improve alot

i agree wit _707027_ too dont make ur sata cable spiral


PS:to me spiral sata look like noob rig

Hi, going to post my first cable management! Did a few on my previous rigs, but.. I would say those are really crap lol. After looking at a lot of pictures, I finally had an idea how a decent cable management should be like. This is the first time ever I've spend so much time on cable management, so go easy on me



SATA cable to the DVD is just too short, can't route it to the back. Might buy a longer one so that I could hide it from the back later on.

Warning : Home of cacing ahead



uglyvamp didn't reply me and I could tahan, so I cut those 3pin and combined them into one molex. (4 on each molex). Still very messy... but was way better than before. Another problem I'm facing is, this Huntkey PSU has VERY long wiring... So hard to hide them .

ya celciuz, i think u need to start hunting for a longer sata cable.
btw,my other side panel also got a lot of worms..just like u.
dont worry

No need to care so much bout the otherside, anyway, who cares if u put makeup on ur butt rite.

Thing on other side is... Very hard to close Need adjust here adjust there then only can close lol.