can improve more wan =D try harder heheh be patience =D

u sprayed the interior black and look more tidy alrd...
and a new cable hider box..
haha!!

btw, where is all ur post counts?

Hi guys this is my cable managment done by LilRazor :-

Before


After


Thanks alot LilRazor..

eh i din really do also T.T i only help to tell u on webcam haha if i was there it would be spotless lolzzzz

This post has been edited by LilRazor: Sep 5 2009, 07:02 PM

hhaaha..yea..thanks bro..

Redone My Cablemanagement =D Not Much But Ohwell
Changes : Hide Sata Cable , Hide 3 Pin Fan Connector , Reposition The On/Off Switch Cable , Tidy Bottom Of The Casing =D







Can I Improve anymore?

modular cables........HEHEHE
with custom lengths

and besides that
i notice that just above the psu bay, there are 2 fans there rite?
if you like you can remove the once directly above psu so you can hide you wires there bro

well, if u got the patience, try to arrange it nicely and hold with several clips to the case loh ..

that would be better than just fold all those cable together and tie it with a zip tie only .. .

if remove the fan then got zero airflow =.= around the graphics card and hsf .....


u mean pull all the cable and tie it behind the mobo tray? but then after the sidepanel cannot close =.=

i have a biostar Tpower I45. there's one molex connector to the mobo in the middle part. how do you guys route to that ah?

edit: or rather, any tips of routing that? planning to get lancool K62 for it. initial plan, buy extension molex cable and sleeve it to route from the top tray hole.



This post has been edited by SpikeTwo: Sep 9 2009, 11:15 PM

ur plan with the top tray hole is a good one. thats what i would do too if i had that molex at the board...

alternatively...u can leave it unplugged if im not mistaken.

if it is me then i would route it through the gap of PCIE and PCI slot

Eh bro, you really need to plug in the molex only can power up ur rig kah?
for old mobo, the mmolex connector is supplying more power to the PCIE lane one, see whether it affects any performance on ur rig or not, if not, just leave it lo

yeah i read it could be left out. but just to play safe.
thanks for the suggestions guys, hopefully everything could be put together this weekend and i will post a pic here for bombardments...ermm... i mean comment. thx

This post has been edited by SpikeTwo: Sep 10 2009, 09:53 AM

This is my first attempt;












anyone has ideas on how I could improve my cable management?

mizie86

the atx 24 pin + 8pin would look much nicer if you re-route them behind the mobo tray
try to group the cables together using cable tie bro

yeah.....turn ur PSU around so ur cables are on the mobo tray side...can help u gain that little extra length u need...and make things neater too...

also route the cables behind mobo tray as mentioned by dro.

yeah..I've tried turning my PSU around but the 8pin cable still cannot re route thru behind my mobo. the cable is very short. in addition, there was no hole that the cable can pass if it gone thru behind my mobo (very sad).

time to invest in some psu-extensions bro
it really helps since you will have longer lengths to re-route your cables

man....non modular PSU sure hard to do cable management. LOL...gives me headaches.