Go for a ported enclosure which I'd think will complement your current amp.

why not sealed enclosure le?

quite expensive..almost same price as alpine type s

or can get a pegasus PG1225 already and got some change left..

have u ever listen to that RF P1? how is the sound?

---

Added on July 24, 2008, 9:14 pmsealed box require extra rms to get it sound decent..like your woofer is 150rms, your amp must be more than that like 200rms to push it

of course this is just rough estimation, it is up to u

This post has been edited by athlonxp: Jul 24 2008, 09:14 PM

i listen to Punch P1, P2 and P3 b4.. P1 is very nice.. enough for entry level SQ.. P2 more to SPL and P3 also SPL oredy..

and the RMS not necessary need to be over the woofer RMS.. i ever see my fren go competition the amp after bridges is just around 160RMS can push a 200RMS woofer nicely..

icic..

too bad never see people sell RF punch P1 in kuching

ice ppl said if amp rms bigger than woofer will sound nicer wor..but i duno la..i ever try to use a 400rms woofer with 280w amp..it sound like shit and weak

coz tat really under power already i think.. i not sure also.. dun too low the the RMS differences.. i think mainly is more to the settings as well la..

The Punch P1 got 2 models ler.. 1 is the old type 1 o.. and another is the new 1 i think.. different design..

In-Car listening pleasure, In-Car techno, Jam-Zone Outer Car Techno or Competition SPL requires completely different setup procedures for amplifier Ohm-Bridging & Woofer-Flex to maximise application weather for listening or competition.

like me if listening the amp setting will record down de.. coz when unplug the battery for more then few minutes the amp setting will be reseted..