How come overclocker donno how to remove heatsink?  Upgrade to TR 120 

really dont know. have to check tomorrow.
i bought it at pzcone at 200. supposed to be 180. but they dont want to sell it at 180.
many people here say stock is enough. 

i'am running vcore 1.4 at 3.0Ghz but it still fine

, 1.5v i will try la later but my ram seem holding me back 

Hi..sifus out there..wanna ask a question here..anyone who is using Biostar TA770 A2+ out there? The north bridge chipset is terribly hot..how bout u guys? juz wanna know..the passive heatsink there is quite small, do i need to change it to another one with active cooling one..how bout the abit ax78 user? did the silent otes performed better?

@digswell
walao bro..custom WC for ur NB..poor student no money for WC..between i m thinking to get the evercool serpent how's tat sound?is it ok?

thanks for the link. now i know why.

my pc reboot twice now. never have this issue before. just like someone press the reset button. anyone know why? 

i wanted. the shop ay its too hot. regret 
its not. no blue sceen. where to untick?
41c only. i dont think its hot.

i tried E7200 default clock same like 3ghz X2 performance..

i set at 1.5 but when orthos load it goes to 1.6v. is that okay?
im getting 3.48ghz now. whats the looses ram timing i could you. trying to stable it down.

where is that?

I dont think has leh..Where it is?Forgot edy

cant find that in my bios so far. 

gigabyte dont have?

Becareful with the mobo....it doesn't support 125W. I think 3.48GHz at that vcore is nearly (if not exceeding) 125W d

it's better than mine lol   wish i had buy f3 

AMD X2 4600+ F3 | imsmiko | Gigabyte GA-MA78GM-S2H | Team Elite DDR2 800Mhz 1GBx2 | DDR667 | 5-4-4-11-14 | Coolermaster Hyper TX2

28s | imsmiko | 3529MHz 280x12 | Gigabyte GA-MA78GM-S2H | Team Elite DDR2 800Mhz 1GBx2 | 748MHz @ 5-4-4-11-14-2T | Coolermaster Hyper TX2

yea. wish you luck. don't get beaten by a girl. 

  Preparing for 4600+ Brisbane oc battle.

Wish me luck..

ram    what you suggestion?

here some pic of heatsink that i apply on the mofset...still iam not achieve prime stable on 3.1xxghz

iam just using double sided tape since there's no screw hole
mostly u guys replace the north & south bridge heat sink or not?? or just put some fan.. thx!  

is it if apply that tape when i stand the mobo inside the casing the heat sink will fall down??

---

Added on August 4, 2008, 9:07 am
huhu...better not.. is it i still need aditional fan if i use the tape? 1.45v also not stable loooo on 3.15ghz