so how to check the actual temp? im using HWmonitor. normally i add up core1+core2= cpu temp.

Like Maybe thermal probe..etc
Btw bro digs,i need to cool out more my Proc,RAM,mosfets..etc?

12x267 , ram ddr667 , vdimm 2.0, 5-5-5-15-21 2T

---

Added on August 10, 2008, 12:16 am

My cpuid HW Monitor shows core1 and core2 only 20c (very cold- maybe can OC to 4GHz)
but cpu 4xC, I trust the cpu temp more. 
Abit EQ show cpu temp 4X-5XC

So bro digswell,the most correct one is Core 1 and Core 2?

My latest OC Result

Hmm yea lor.Btw bro xixo,i will enter SuperPI 1M first.I cant get Orthos and SuperPI32M stable..But gaming all okay even got games that stress 100%

want the fast there is. 
thinking to get a god display as alread bf promise to buy for me. 
they say some games doesn't work with crossfire.
looking for bright lcd. 8000:1 and 2 ms respond.
24" cant find that criteria.
oh. will go for seagate. pc cooling has single rail psu. same with hec?

hp have 10000:1 contrast and 2ms?
oh thanks. the 4870 will be sponsored by my boo. 

hmm, the current situition are:
amd come out with cheap dualcore, ppl will think intel is expensive coz they r comparing with C2D, not pentium dualcore
amd come out with BE, to cover their weakness on hard tweak on normal htt overclocking
intel selling C2D with 2x, 3x,4x of x2 price, because no ppl can beat their C2D
intel board are expensive, because manufacturer focus on highend board for intel, not amd
amd combo look cheaper, but in fact, they both are around the same range, with similar performance

Today, AMD are focusing on marketing to survive, this is only thing they can do for now.
Intel is using AMD weak processor performance now, to gain more $$.

this is what i could see, for now

amd knocked the door to failure, with the phenoms to be honest. They had superb control on the dualcore market. I think even a DUal Core e2140 like mine, would be able to upstage an AMD easily.

For comparison, can someone here give a beating to a 20m 01s on 3.2Ghz of E2140? This is done on a 1:1 divider. Architecture is just far more superior thats all

---

Added on August 15, 2008, 2:17 am

i would say an e2140 would give a good run with rm2000

bro, load temp for

oc'ed f3 never reach 50'c iirc 

b3 on stock ~60'c 

b3 @ 2.7GHz ~70'c 

b3 @ 2.8GHz ~80'c 

b3 @ 2.9GHz??? - i hear cooked pop corn sound like those u can hear @ candy bar of cinemas... 

@ imsmiko:

i think to by stuffs on d egg one need to be a citizen of d state. i dun have connection there... 

TA770 will hit up to 61c max on 2.6ghz

aiyoyoyo   i already give up ( just a few days ) ocing my rig... even i applied CM ramsink on the mofset still heard some wierd sound area mofset that mean not stable for the system ...i think my rig already full of fan including wall fan lol ...y arr when applied the vcore around 1.5v and oc to 31xx the system must not pass the orthos even i lose the ram timing and HT link...   huhuhu..my cpu temp on 15min of orthos r below 60c..here my last setup :

AM2 5200 Windsor F3 89W
Biostar TA770 A2+ (A78XA328.SPX Bios)
Corsair DHX PC6400C4 rev 1.2 1GBx2 kit

FSB 285 x 11 (cpu multiplier) | Vcore increased +0.125 to +0.150 from 1.35v
DDR 800 (ratio) 5-5-5-18-23 2T 2.1v (ram already run memtest 3.4 stable)
HT Link i put 600
HT volt i put 1.300v | NB i put 1.9v (correct me if iam wrong)
 
is it my proc already reached the limit??
or my mobo cannot handle the proc wattage on oc? thx!  

all guys so kaya, can pay for high electrity..