if ever d chip goes to another hand, it doesn't mean that he dun wanna sell u his chip. he just honorin his words to d buyer who closed d deal earlier then u, a man need to do what he need to do. 

if ur cravin for MHz, get a 6400+ & buy a gud set of air/water coolin... 

bro cv..dun u wan 2 put in ur simple list..no 4
me very simple..

1)Kaw overclock setting and must able to sustain the clock.
2)Full AtX
3)Not manja(if you know what I mean)
4)SLi??

@imsmiko
if im goin to sell mine..i would like to sell mobo+cpu..
dare to offer?

What's your cooler ? Lap your proc maybe ?
Just like me last time. Already using AM2 system, later changed hardwares because of this OCing stuff

Sis..is PC Zone..nt czone ya..btw it is great too if u can get bro -pWs- 3800+ F3 from V1 Bulk..

4600+ F3 is better, even at 3.2ghz, it still better than 5000+ BE G2 core in term of performance..
sumore the price is rm180 only at lowyat
yesterday bypass pczone, i saw still got stock
fast go grab it!!!

make it easier to OC by having the unlock multi, but it doesnt mean u can clock stable n higher..

@imsmiko
if i found u a guy..i kill u first then u shud go for F3 to compare with ur 4850.. no need to invest more on cooling.. stock cooling can do.. if u go to BE u need to spend more on cooling

imsmiko mei mei is amd hardcore fans ah? cf'in 4850 gonna generate lotsa heat in ya rig, that's sumthing u should take note with. 

any choice of cf board in mind? if not i would suggest ax78 to u. cheap & good for x2, could be for b3 phenoms too (will let u know once i get ya chip)... 

k9a2 platinium is good but there'll be new 790gx boards releasin soon. my advice is stick to ya 780g board 1st, once a cheap + gud 790gx released (like biostar 790gx), go for it. 

yeah, girls spend more in enhancement/maintenance in total... sis xixo is a shemale...     

Ignore those Intel.. ahem ahem
Says not fact right la,just ignore.

WHAT THE HECK?You sure?4600 F3 yours at stock VCore?Or what?What your 4600 F3 stock VCore.I wonder how's your F3.
No need so high VCore.Mine 1.25V edy can push and stable@3.1Ghz.Yours not really good batch or u just increase it?

for processor oc:

1. lower down ya ram divider to ddr667/533

2. lower down ya htt multi to 4x/3x

3. for warm up, try (12*250) 3.0GHz @ 1.20~1.25v.

4. prime it, if stable for 1 hour, increase gradually like + another 10MHz increase in htt. prime it again, if not stable, add a notch of vcore and/or vNB. but usually i'll just increase vNB for a 2/3 notch from default.

5. repeat step 4 until d point that no matter how much vcore u put d chip won't be prime stable. (watch d temp of ya chip & pwm).
noob guide from a noob, hope it helps... 

dun just run it, prime it... 

when ur done findin d max clock for ya chip, it'll be more interestin on ram clockin... 

@ ocz:

get a gud batch of 9950/9850 then u'll see d figures fly like f3... 

give it more then... 1.25v mebe... 

it's definitely abnormal... what kinda cooler ur usin...   

something is really wrong there, u mite need to re-seat d cooler again. @ 3.1GHz w/ 1.3v, it shouldn't reach 62'c even w/ stock cooler imo... 

What do u mean last Tx2? Last bit amount of Tx2? That actually tells something....

no, tx-2 is one of d best thermal grease available (pls correct me if i'm wrong). it's more on d way u applied it. u must spread it equally. 

is it possible to post a pic of ya case to show d ventilation of air? 

Probably applied too much amount?

Check this manual (should be similar to tuniq even though this is AS5):
http://www.arcticsilver.com/pdf/appinstruc...d_dual_wcap.pdf

if u wan to use oc setting for 24/7, a 3rd party cooler is recomanded..
btw, where u get your F3?

How come overclocker donno how to remove heatsink?  Upgrade to TR 120 

RM200 ....i no like pczone...they always like da.  if other shop no hv they will sell more higher price. i kena last time.hehe is 4 year story edy

Stock vcore is enuf for 3ghz with stock HSF....if wan more hv to use better cooler

Wah..luckily they sold me RM180 tat time.. ..or maybe they started to know the high demand for F3??lol..so sis it is better for you to get a 3rd party heatsink to go for higher clock..

@ah_khoo
ya bro..Arctic TX2 is one of the best thermal paste..even apply a little can spread very broad