Question,

I just bgot a 4850 Sonis from Palit. Will a 4600amdx2 bottleneck this card badly in performance?

lol welcome. Wont la i think. U can go run benchmark and see ur benchmark score good or not.

4600 will bottleneck abit la

perhaps 5000 will b good for u?

hello guys,

i have gigabyte 4850 1Gb DDR3, 700/993... just want to know how to edit BIOS using RBE? i download my BIOS using GPU-Z and open using RBE... on the RBE, it shows that the state 3 which is maximum performance using only 1) 500/993 1.084v, 2)500/993 1.084, 3) 700/993 ---.

my question is :-

1) which value do i change for better overclock? my gc is stable on 740/1050 using stock cooler and stock Vgpu?
2) let say that on the clock info i change 700 to 800 and flash to my card, will the new clock is 800 or do i need to overclock again?
3) or just change the vgpu volt from 1.084v to 1.158v, flash to my card, and overclock using rivatuner?

i remember that 3dguru review this card can achieve 811 core clock, 1195 ram without modding... how came mine only can only up to 740/ 1050 stable?

cheers

wan to ask is there any possible that flasing vga bios will damage the card...

n wan to know how to flash the bios... i noob in flasing vga bios

wel..of course the failure of flashing will cause the possibility to damage ur card...but if ur using winflash, i tink its pretty easy to flash...no worries...

which one better winflash or gpuz

lol i am noob bout tis

If flash fail, then have to send back for RMA

gpuz?tot tat was only to see the gc??

U'll need GPU-z to extract ur current gpu bios, RBE to edit bios, & WinFlash to flash the bios.

oh...but some u can directly download the bios rite?

http://www.techpowerup.com/vgabios/

yes, u can grab it here too


http://www.mvktech.net/component/option,co...tory/Itemid,26/

This post has been edited by rlhc17: Oct 12 2008, 03:58 PM

den shud b fine using the winflash

flash to which card bios? mine sapphire support?

whichever u desire.
but wen u flash, always keep a backup copy of original bios in the medium dat u use.

anything happens, may b error during flashin coz compatibility issues, immediately flash bck 2 ori bios.

most important rule: NVR REBOOT THE PC IF ANYTHING SHALL GO WRONG

This post has been edited by tech3910: Oct 14 2008, 02:57 PM

lol..yea..alwiz take tat as reminder..otherwise later u boot no display den lol ad...hahha

well, it happens 2 me b4...................

even so, there is still solution 4 it. so dun worry 2 much.

lol..flash several times..all success..so far so good..no failure yet