Which devices are u using now?

If Linksys WRT54GL u can flash back to original firmware . This is what i do if i want to send it back for RMA :-) . Reset 30 sec double blink then flash it to the stock firmware via web gui from dd-wrt. As far as i concern no need to set ur ip to that subnet

What is the original firmware version?

Check out www.linksys.com

I am adding this 2 Asus router into DD-WRT test unit

Latest current stock firmware is already good but no chance increasing their transmit power

Asus RT-N13U




Asus RT-N16



Will post results soon

This post has been edited by MX510: Jun 20 2010, 09:09 AM

You have both of them? Where did you get the N16? I stopped looking for it a few months ago since I couldn't find them here

Yes bro i have both of them in my house right now . It should be in the market soon. I'm doing RND for Asus

does this DD-WRT has some feature like tomato that can detect what IP is using how many bandwidth?

Yeah need to use rflow for that features it's a software

Here is sneak preview of Asus RT-N16 with DD-WRT 128MB RAM

Firmware: DD-WRT v24-sp2 (04/23/10) std-usb-ftp
Time: 00:11:09 up 11 min, load average: 0.04, 0.06, 0.04





Uploaded with ImageShack.us

Guys i've already succeeded flashing the firmware on my WRT54G v5 & found out that the router need another modem to connect to internet is that so? but why inside the firmware got a setting asking us to type in our username & password?



This post has been edited by milky: Jul 19 2010, 12:29 PM

i've got 1 problem regarding the Access Restriction OPtion
i've already put a e.g. IP address 192.168.1.4 to DENY internet access.. but i still can use the (WIRELESS) 192.168.1.4 to go to internet.. why is that so?



I'm Using WRT54G v5 Linksys

This post has been edited by milky: Jul 19 2010, 05:30 PM

For RT-N16, you can find the stocks in lowyat mall, I saw it in C-Zone and Sri computer last week

Few things i've already done
1) flash my Linksys WRT54G v5
2) connect to my modem to connect to the internet
3) can connect to my router via router IP
But after awhile when i wanted to connect to the router it take alot of times sometime even cant connect to the router.. i need to restart to connect to the router again..
any idea wat happen?

Use different firmware build

I'm Using WRT54G v5
which one is recommended?

This post has been edited by milky: Jul 21 2010, 04:38 PM

Sounds like the NAT table died at least that's how someone described to me what it meant.

Some routers when they have too many connections fail to close those connections when it is finished and just open up near ones. Once the limit is reached u will noticed new webistes not loading but old ones will, bt slowing down, router web interface not loading, etc...

@MX510 & rangerred
any recommended RouterModem able to flash DD-wrt or tomato
becoz now my setup is
innacomm w3100 > WAN PORT WRT54G > via using wrt54g to connect to the internet....

Go for stable version

U should consider urself to Linksys WRT54GL with 16MB RAM or Asus RT-N16 with 128MB RAM

That current router is just 8MB RAM and 2MB Flash

Chipset BCM5352

* DD-WRT Wiki: Linksys WRT54G v5.0 & 5.1 & 6.0


RAM 8 MB
FLASH 2 MB

the WRT54GL & The Asus RT-N16 both also routermodem?
if yes den 2moro i will go shopping..

Nope it just router really not recommended for u to use all in one

DSL modem are easily can get hit by lightning so if they are separated it is much more secure n safe