Can someone share ur t-power bios setting in O.N.E tab...

want to know d same oso...
d ram ratio some moar...
IP35-E bios is moar friendly....

can't wait to change procccccc
then onli i feel like changing mobo

but now oso very itchy to change to tpower
ip35e no Vtt....hard to play high fsb

The problem is.. There are NO CROSSFIRE below the ATI Overdrive menu.. uwaaaa... seems like my CF setup couldn't recognize by BIOS itself.

anyone trying CF with this mobo? mind to share your experience?

For your information, i trying to sweep between these 2 cards to the primary slot and both of them running fine and perfectly.
i think there is something worng with the secondary slot there.

try flashing the latest bios and see what happens

This post has been edited by ben_panced: Sep 16 2008, 09:09 AM

Guyz...How do we wanna change RAM timing on these board? Coz there are so many parameter there. Using latest bios. A far as I concerned, previous boards of mine only have that 5-5-5-15 only which is not so fuzzy like this one...I wanna make my timing more relaxed to gain more speed for my E8500...Help mostly appreciated.

u can use the memset to look for correct timing..

other timing that affect stability other than the big 4 timing aka tCL, tRCD, tRP and tRAS is tRFC and performance level. If ur ram are holding u back, just relax the tRFC and performance level

Aready with the newest BIOS bro.. wonder what happened with my mobo... emm..

try booting with only 1 card, but this time with the card in the second slot, see what happens

t-power user can learn OC at this link...btw,i still not understand to full utilize with its setting....huhu

http://www.biostar.com.tw/app/en-us/event/tpi45oc/index.htm

i had problem with my hd3870 last time with old bios...after flash new firmware ok ad...ur bridge got prob? or mayb any jumpers missing?

then y bother posting it??
post somtng that could benefit to all la abang...

got few info on it ma..
still can be use

yet still complicated...
need sumone to summarize everytng....
make it simple....

wanna ask...tpower got oc recovery ar? lazy to reset the cmos

ok i'll try.. this 1 never try? boot with single card but all jumper set to crossfire right? tq 4 the suggestion


i got 2 bridges oo bro.. try both of them ady.. not to avail ... haisshhh
AFAIK, all jumpers is fine. no missing.. except.. ermm maybe disconnected.. try to check it later by sweeping the jumpers each other.

huhuh...wanna somenone teach n translate...my english not good...

got...u can set it either 1,2 or 3 times boot to load to d recovery mode....

yerp..but sometime when the setting goes wrong end-up fail to boot
still need to reset cmos by oldskool method,luckly we can save the setting lah