Here you go

Ignore the voltage..CPUZ sometimes error.I have set it at 1.35V at early edy = =

This post has been edited by AMDAthlon: Mar 5 2008, 10:48 AM

NOPE!I set it at 5x it went crazy.It stucks BEFORE LOADING BIOS SCREEN
need to reset CMOS edy..zz
May i know Memtest is a software or bios software?Btw dun forget i using Stock Fan Still saving money for Phen oms X3

This post has been edited by AMDAthlon: Mar 5 2008, 11:10 AM

Guys i still have prob even increasing the VDIMM to 2.40,Ram Divider setted to 533,multiplier set to 10x,Command Rate set to 2T.Still it stuck at Verifying DMI Pool Data....What i need to do more?I done do memtest and no problems/error was found.Whats the problems here?

Nope i set it to 3x already only reach@800 HT Link..I still wonder why

275 HTT Speed X10

= = not very accurate.However,is there anything problems?I still need help.Memtest giving no error at all

Wah wont it damage my proc?Since i only use Gigabyte Superb 460W..i wonder its enough juice for it

But not stable also=P
Btw so i increase the VCore huh?About 24/7 It ok de..when idle 33C WITH CNQ Disabled.Load below 60 only..Time to get new fan..eh hold on waiting for phenoms X3

Yea..We will see the grabber and how far it can be OC.But for a hardcore overclockers wait for B4 Stepping.Which is EXCLUSIVELY design for overclockers.

June if i not wrong = =
I am hunger for it already sia

This post has been edited by AMDAthlon: Mar 5 2008, 11:27 PM

Well i not ages like you guys.See Signature for info
Btw X3 is enough for me already and for sure when Stepping B4 released X4 will be quite ex

Same goes here.And plus X4 is quite too much for me.I am not a heavy application user

Sifus i still need help.After Upping VCore to 1.45V the results are same.STUCK at verifying DMI pool data.Haiz sien ledy lor..I still dunno what to do..While u guys do fine.= =

This post has been edited by AMDAthlon: Mar 6 2008, 12:43 AM

May i know how to pump it?I think there is no settings in BIOS which i can increase my nb/sb voltage

Here's my problems

Guys i still have prob even increasing the VDIMM to 2.40,Ram Divider setted to 533,multiplier set to 10x,Command Rate set to 2T.Still it stuck at Verifying DMI Pool Data....What i need to do more?I done do memtest and no problems/error was found.Whats the problems here?It means IT WILL STILL STUCK NO MATTER WHAT I DO

This post has been edited by AMDAthlon: Mar 6 2008, 12:51 AM

I will try lower it,perhaps 2.10 VDIMM?Bleh done at 400 also same.Nope if i lower it it the HTT only can accept around 220 and it will boot .Impossible lor at least a 2.7Ghz unachieavable.

This post has been edited by AMDAthlon: Mar 6 2008, 12:59 AM

yeah it stuck at verifying dmi pool data..sien edy la

Just back from boot.STIll after decreasing the VDIMM to 2.20 no results.Haiz i hate restarting..= =
Here CPUZ screenshots << Please note the OC is done in Windows!

This post has been edited by AMDAthlon: Mar 6 2008, 01:13 AM

Thats not.Its not stable.That time i didnt increase the Voltage to 1.45 yet.Still i repeat,the OC is not done in BIOS it is done in Windows.I set it in Bios,stuck..= = zzz
Oh ya forgot to mention,i tried lowered the divider to 400,more worse it goes to safe mode
Btw,where can i find software memset?

This post has been edited by AMDAthlon: Mar 6 2008, 01:17 AM

As promised here is the memset

<<DEFAULT

Btw,i have tried 2T still same.Digswell yes i did pump it around 1.275V

This post has been edited by AMDAthlon: Mar 6 2008, 01:30 AM

As what i say,i cannot post the current one as it wont boot.and the top one is a default.What do you mean changed settings?But i will try to change it to 2T 8ns..

This post has been edited by AMDAthlon: Mar 6 2008, 01:46 AM

I pening already lor..Somehow,my BIOS CANNOT ACCEPT 2T???What the heck is happening to my mobo?When i set it to 2T it cannot boot.Stuck at Verifying DMI pool data.What has caused it?(still no picture as 2T are unsettable).But when set to Auto/1T it boot and works fine..

This post has been edited by AMDAthlon: Mar 6 2008, 02:04 AM

Yes it is stock speed and its running January BIOS if i not wrong.Unless biostar has off overclocking capabilities but its mobo is known good OC mobo,should have no reason to off capabilities

This post has been edited by AMDAthlon: Mar 6 2008, 02:12 AM