dude ure vcore is worrying..
get a voltmeter..
and find a vdroop mod.

wei moderno ketinggalan lar wei..

dude that was last time...
ddr2 already like how long in the martket.. since my p4 D already.. so most of the chipsets are already mature and nothing really new is out there..

so most mobo makers are already in the loop..
except errr asus on 4 sticks ocz rams.. something to do with the tRFC which the whole XS has been petitioning and the new bios for all the p35/x38 asus boards are going to have some insane tRFC up to 130 i think..

wei dont kacau u .. then u complain tak ada sales.. need to put bread and rams in ure plate and mobo..

some ppl never satisfied.. kekeke

geee dfi+some team bro's.. the one i got from u last week.. good stuff..
unless u still can get some cl3 pc2-6400..

and put some hd3870x2 rog.. awesome ..


This post has been edited by cstkl1: Feb 15 2008, 03:02 AM

faulty ram..

team rams has tight tRFC thats about it..

oops
i meant its the fault of the ram..

a few ppl been complaining about teams tRFC..

especially when u go 4 sticks..

not faulty ram.. my bad..

but he will never give up that for his OPB's.. kekek yeah bro moderno.. ask darscythe for those..

not worth it nowadays
unless ure going a bit extreme on vcore..

above 1.45v on vcore..

other than that.

heck u got so much cooling..kekek just try leh..
i still prefer the ultra extreme cause of quality compared to xigmatek..

clean ure rad dude.
not suppose to have such high delta.

suspect gunk or trap air.


This post has been edited by cstkl1: Feb 21 2008, 05:09 PM

there was a arguement on this on a few forums
this is what was said basically

from G0, MO, C0 stepping basically all those that came after B3

intel designed the DTS to be inaccurate below 60C.
so basically all the idle is wrong which i think is true.
heck u should see mine..
1.48v load is 68C
1.5v load is 80C.. go figure wei.

This post has been edited by cstkl1: Feb 21 2008, 06:26 PM

funeral arrangements for ram predicted within the next few months..

its the black pcb right..
thats a low latency pcb..

try not to go more than ure default voltage
if u want to run 2.2v.. use active cooling on it.

many ppl dont know that D9's are not suppose to be running more than 55-60C.

wei his stock is not 1.35 mr. kmarc

thats i ve been telling u vid on core temp is base on acpi table..
his vid is wrong..

true vid is when u put ure proc into the mobo and leave at everything auto. .
thats when u get ure true vid which u can see from ure bios reading.

okay that is suprising for me..
ure proc vid is so high.. for stock.. wonder y??

try different fsb /vtt termination voltage.
adjust ure gtl's to be around the same as ure stock.

hmm only rampage formula and gaygaybyte X48 seems to support DDR2

but looking at the way ppl are overlclocking.. i think better not..

this is ure batch dude
600fsb
http://valid.x86-secret.com/show_oc.php?id=320955

impossible to get that stable..

its just for benching

dude just to tell u that in the past
found that sometimes.. not all the times..
scaling for proc sometimes better on a higher vcore proc. than the lowest.


This post has been edited by cstkl1: Mar 2 2008, 10:54 AM