i assume u are using the maximus formula board....is suggested that u reseat ur nb and sb together with all the mosfet on top near the cpu part..try some setting at ur bios like cpu pll, fsb vtt, vcore, vdim, vnb...make sure load calibration enable...and this board is a good board for overvolt so make sure dun set everything too high..pls get a fan for ur TRUE for god sake.

wat bios version are u using? anyway ignore the damn cpu temp in maximus...use coretemp to monitor all ur 4 core temp which is more accurate...

This post has been edited by intothefantasy: Dec 26 2007, 07:05 PM

lots of ppl says u need to heat it up1st before taking the heatpipe out..heat it with a hairdryer...but dun too long and too hot..btw try 0907 bios...