i thought all 690g chipset x1250?

Yes but his shows x1200 on catalyst. Any idea ?

how bout clock speed?x1200 speed or 1250?

maybe they just show there the main series only...my x850 before also showed x800 series

amd phenom 9500 ?
is hard to oc ?

This post has been edited by likito: Jan 20 2008, 10:50 PM

Very very hard to OC.

---

Added on January 20, 2008, 11:09 pmread some reviews, if im am not mistaken the '50' is hdmi output.
so if your no hdmi its 1200 and with hdmi its 1250.
that why my asus 690 is a non hdmi is 1200 only.

This post has been edited by DevilMan: Jan 20 2008, 11:09 PM

I thought your phenom runs at 2.6Ghz at default vCORE.

2.57 = 2.6. will push later.
yea its default vcore.

Oic,Well keep playing with it bro.Hope u can achieve higher with those stock vCORE.

Whats the fastest time for the SPI 1MB for your phenom??

its 33s.
need to learn how to thighten my timings.
so many options in the mobo ram. dunno where to start.

This post has been edited by DevilMan: Jan 20 2008, 11:37 PM

push the NB speed also

thanks digswell.he helping me right now.

---

Added on January 21, 2008, 1:31 amTHANK YOU DIGSWELL ! I REVIVED MY MOBO! THANK YOU !

This post has been edited by Oxburg: Jan 21 2008, 01:31 AM

Dont set vdimm more than 2.1 for value ram. Push your HTT higher bro. Add vcore byk pon xpe for benchi hehe. But make sure ur proc temp dont xceed 60 degree when under orthos load. Good Luck~

I Feel Happy if i can helping ppl .......

I see, maybe that's the problem. TQ very much

Btw X4 hard to OC? Just like Windsor F2 is it? :g: Why eh? Is it because of temperature or something?

I using default vdimn,
so what will happen if xceed 60 degree ,
i dont think it will burn the proc.

Now,trying so hard to reach 3ghz,need to try to up NB voltage.
Urm,seen that OCCT is more accurate rather than Orthos for
stability test,if i want to use the OC setting for long hour.

60 doesnt happen anything, when full load at 60c.. when u just use in average it will not achieve that hot..

review from me:

-ta770 a2+ is suc.k until get the new bios..
-at the normal speed, u will face the hard movement such as when u r playing game with ta770, it will hang n need to restart,
-oc using this board is quite difficult with current bios. when set at 300, it will show 305
-summore the word "mode" edi turn to "moede" (safe mode condition)
-the drop voltage just ~0.02v

thx pray for new bios

I Wan To try to Flash the new bios again...
To Check Up Wat is the Problem.
Wait for my good news

yes sir, will do it tonight.
highest oc so far seen with 9500 is 2.75ghz.

its not the temperature. even i tried to up to 1.433
my cooling able to cater the heat. pushing the fsb is
very difficult.

1. if you failed to push, bios wont boot.
2. fsb push timing is weird let say it wont work with fsb 230. 231 but work with 236?
3. htt x4 x9 or x8 some with work with some fsb setting.

so in a way a lot of reading through people OC and testing needed to achive the highest OC
for phenom.

waiting for u.. anyway who have source at anywhere bout latest bios.. inform the forum.. wanna play game xdapat