Post to us the screenshot of the CPU-Z specs that u have, then the experts and sifus here will inform u what to do. If ur stepping is not F3, don't expect it to go much higher than 3GHz when u oc. Nice mobo u have there. Better try Brisbane if u don't have a F3 or else get the similar 1620 like bro soulfly.

momuchi: Nice info. Too bad the mobo design ain't attractive. And only 3 expension slots. But the onboard gc with memory is nice touch. If it doesn't hinder oc of the proc, then it'll be better. hehe

@tachlio
Do you meant by ACPI XSDT Table??

-pWs-

here is the sreen XD

someone guide me plz~

tat a little oc there
2.00--> 2.10

here is the sreen XD

someone guide me plz~

tat a little oc there
2.00--> 2.10

here is the sreen XD

someone guide me plz~

tat a little oc there
2.00--> 2.10

I m not sure w that function.
You better stick w the setting when you install your windows.

I tried disable it. And I have BSOD

-pWs-

as i know if using 64bit window, u need enable it ~

hoho..i have a person's ta770 here wif me....
he cant wait...x sabar2 nk OC..hoho
how much u guys bought the ta770?

play with divider

I suggest u to set ur vcore to default vcore 1st.

Then put the DRAM Speed to DDR 533

Then put the CPU 'n' NB BUS Ratio setting to X 3

Then Put the CPU FSB RAtio Setting  to X9

Then in the DRAM Setting, put the 1T/2T Memory Timing to 2T.

Then u can start to up ur CPU Clock Speed setting.

Since ur proc is the F2, I think u can't go too high speed compared to the other F3 owners here.

More advice, turn to -pws-, soulfly, dblooi, and ongbs. They taught me the basics too. hehe

but how to see whether it is F3 or F2 something?
is it Mother board or processor smth?

Hi guys, do i need to install the windows Hotfix or just install the amd dual core optimzer would be enough?

I suggest u to set ur vcore to default vcore 1st.

Then put the DRAM Speed to DDR 533

Then put the CPU 'n' NB BUS Ratio setting to X 3

Then Put the CPU FSB RAtio Setting  to X9

Then in the DRAM Setting, put the 1T/2T Memory Timing to 2T.

Then u can start to up ur CPU Clock Speed setting.

Since ur proc is the F2, I think u can't go too high speed compared to the other F3 owners here.

More advice, turn to -pws-, soulfly, dblooi, and ongbs. They taught me the basics too. hehe