any tips on how to apply the camera plateau protector? 

Me too never using any wireless charging , it cause too much of heat and degrade battery faster.

Apple will using silicon carb 1 day, they will be forced to use because all factory will only supply silicone carb that time

Like the iphone 17 forced to use 120hz because alot of factory already discontinued 60hz screen

Walked pass ninjaz and magnet in to check out their casings..and sigh grabbed some BlueO alcheapo casings for no exact reason



Really like the white one, not bulky, feels light and good (about the same as Moft’s vegan leather feel), clicky buttons and inner buttons are covered with soft material to avoid scratches


Clear case is thin and buttons are clicky, normally gel/plastic type buttons are hard to press but this one is designed thinner I think..camera control button is exposed though

That's ugly.

Just bought a 30w 10k mAh powerbank, Pixy Mini Pro to be exact. Tbh I'm not a fan of powerbanks but I bought this also because I do have a bit of upcoming travels and I spend a lot of time editing videos these days. So, I reckoned I might need it when I don't have access to my charger.

I already up my daily battery charging from 80% to 85%, it is just a matter of time I will go for full swing 100%.

Got my Pixy powerbank in just a day. Honestly, I’m satisfied with it. Really fast charge like I am using a charger and it’s slightly smaller than my credit card.

Though I’m not exactly satisfied with the packaging condition but luckily the content is ok and no issue.

yeah i feel that too , try to take off the case and see what will it happen again , because the dust accumulate on the edge only but not the middle , i never heard before that a temp glass failure will causing dust collector.

Are there Sapphire Glass AR 3D heat-bending tempered glass in the market?

But my old HD tempered glass i cant recall having these micro scratch (in white) also.
* is this the coating drop?

Edit: Google and saw this https://shopee.com.my/X.One-Sapphire-Upgrad...308.21135613130

There is no 3d hot bending for Sapphire glasses so far. Only 2.5d type.

Bought at online or Ninjaz??

Seems like u buying all these for dikae’s many iPhones? Haha.. or u also got a lot…
Our bro is a taobao and amazon expert. So unlikely Ninjaz.
Anyone else ditching the 80% battery life cap? I’m already on 90%, feels good. Not sure gonna regret or not 
https://www.zdnet.com/article/after-2-years...ry-has-held-up/

why u need so much of the plateau protector    , are u changing it every month? I thought that area should be quick hard to reach and scratchable? 1pcs should be last quite long time.

I actually stock up 10 more plateau protectors for pro and PM, from the same seller but unfortunately the new batch QC dropped, now the adhesive is different and show bubbles, I just tried to install the new one yesterday, 8 pieces gone in one go lol, all the same bottom  and top got bubble due to adhesive…tested on 2 different phones but same so it’s gotta be the protector QC, but I notice they improved on the cutout for 3 camera lenses, it’s smaller hole now so it fits the ring ngam ngam 99%, leaving almost no gap for dust trap…but the mic cutout could be improved coz it’s still abit big now, I’ve had 1 for 17 pro blue film with 3A prints, that’s the best imo, best cutout, small mic hole, lidar and flash also ngam ngam 99% no extra space…lookout for the 3A ones if you are going to min max the protector

Hmm i don't like bigger cutout on mic coz when you take close up pics especially in mirrors, it reflect the hole quite obvious lol...

Also the adhesive is slipping into my ocd...I replaced 8 times and still the same so its not just dust under film anymore

The clear one however is top notch, cutout 99% fit on all the holes including lidar and flash, mic cutout fits just nice..no bubble etc...only thing is not matte sigh

This is the clear one, from same seller...

How much you pay for the branded ones? Can get from ninjaz?

Wonder if the branded ones have better adhesive glue on these films..

Port [USB-C] protector hoarder

Just bought the camera button soft fiber glass protector cause the Nilkin case for my wife i17 doesn't cover it. Wait for it to arrive and see how is it.

I also saw some seller now selling the i17 Pro/PM's ceramic shield protector individually and wonder should get it or not, hmm ..

Would you like me to start the frenzy? But I do have the button protector; I bought it before I got my phone, just as a precaution, in case I use a case that doesn't cover the camera button. However, I didn't use it, as even though my case doesn't protect the button.

Not enuf, i shall bring camera button protector and ceramic back protector


The seller told me the back protector piece is 0.15mm

wahhh this one enough for many iphones

Does this block the touch effect of the button ?

actually after getting all these full body protection etc, it kinda cause reverse effect for me and made me feel like going naked and remove all the protections lol, seriously thinking hard if I should use naked and get Applecare+ haha

Where is the crack line? Can’t seen. 😅