Hi. Recently upgrading biz fixed ip, got 5 fixed ip.
Old tm modem dlink can directly set wan ip as router IP, sp when I plug in lan cable, I can direct assign fixed ip and use.

Now the new tm modem can't, have to set lan ip and wan ip separate. Any way can do?
The tm technician didn't seem know how to do so.

This post has been edited by cloudclone: Dec 30 2024, 10:10 PM

Ask them to send their higher level technical team

Only TM can do that, they must replace router for you if existing router cannot support it

port forward your desired private IP and port to the fixed IP?

Any detailed guide? It works by port forwarding like normal?

if the tm dlink is same with home router, it only have basic port forwarding feature (cannot add wan IP)

so, connect the device to router lan port and set tm wan fixed IP on the device. iinm need to disable NAT at pppoe profile first.

but by doing this, wifi will not work and only device connected to the router only can get internet. need to add secondary router for NAT and dhcp.

get another router like fortinet or mikrotik.

i'm using pfsense btw and this is my settings:

Pfsense add port forward like the one u set right?

yeah.

you're hosting anything at office?

Yes housing everything

the firewall/port forwarding section of your new dlink router look like this?

if yes, have you tried entered the one of unifi fixed IP at the remote IP section?