the sifoo has spoken.. ... ...

if anything, it should increase fc
but at the same time increase power marginally
the bullet has very little air flow resistance compared to a normal box
this will reduce the back pressure on the exhaust stroke which is caused by the air flowing through the exhaust pipe and being impeded by the box's dampers
less back pressure means the exhaust gas will flow out faster and more air can be sucked into the combustion chamber
more air being sucked into the combustion chamber means more fuel will get sucked in also
this will translate into more power since more fuel is combusting
but then this will also result in a slightly higher fc

tis 1 of cuz i know la,but s i said jus put a small thin film layer of good quality grease d...
i also got put a thin later grease on whko555's car n it helps reduce sum noise create n make him felt so uneasy d. . .

im not saying it wont work
it most definitely will
the grease will lubricate the belt's movements on the pulley
so basically rather than vibrating (at a very high frequency) when running over the pulley,...the grease will help the belt to slip thus eliminating the sound
all i suggested were two alternatives which are non-destructive to the belt's material
up to ya'll to choose

put me on da table pula. but the noise is back now.... aiks.
i saw some workshop did the same also.

BTW what is the piping size for good fc n what is inside bullet actually?

wah..so good...smoke gv satisfaction maa..
as for me, is not that i dun wan drive fast, but my car cannot go fast..

i am like attending a science class. but neosaint99 hv gv a good advice. ^^

This post has been edited by wkho555: Nov 1 2007, 11:26 PM

i din't say it'll work or not but still small amount of grease only...
if it really tat destructive my car won't b able 2 reach ard 70k km for it's major service n i won't put ppl's life in danger also cuz later kena sue then i die lo~

i think so, midbox for more silent drive, bullet for more noise...as for FC, i am not so sure..

oh sifoo kweng, where are u...

y cannot drive fast? ?
jus ard 80-100km/h also ok d. . .
if not later above 120km/h kena duit kopi tambah gula lo~

For 1.3, best is 1.6'-1.7' piping.. When TT, i try bring kweng come. then you all mai can ask him everything lor. hehe

Hahahaha...duit kopi tambah gula??

@cheeann
My car when reach 120km/h, the pedal seem like very hard to press d. Any idea??

-pWs-

i ajak him already..but he said weekend very busy..

---

Added on November 1, 2007, 11:32 pmscare later my 18 years engine KO, no money to transplant yet...
now, driving also around 80-90..

This post has been edited by flyingteeku: Nov 1 2007, 11:32 PM

waa. . .
u finally alive~
how do u manage 2 escape from domo_kun d? ?
wkho555 tot of reporting 2 police tat u MIA d. . .
hahahaaha~
tat's good ma...
ur 'lou poh' treat u so good dowan u 2 go above 120km/h
or who knows she sence there's a police trap so she make it harder for u 2 step lo~

---

Added on November 1, 2007, 11:34 pmwon't ko d. . .
jus normal drive can liao~
so ur car still got d mild vibration on 90-110km/h??

This post has been edited by cheeann: Nov 1 2007, 11:34 PM

Finally me alive??
Manage 2 escape from domo_kun??

Any idea to fix ar?

-pWs-

dont to off topic pls
me on behalf of kevinlim to monitor ....

what is the exhaust piping size for original LMST?

This post has been edited by wkho555: Nov 1 2007, 11:40 PM

yup yup. . .
tis whole day wkho555 looking for u le. . .
macam rindu kat u~
hahahaha~
have 2 c c is d thing which causes u tat lo. . .
andy:
since wen u so semangat d? ?
hahahaha~

hehe....so, drive slowly la, if u drive more than that, i will be left far behind..so just maintain it, and we happily cruise together..

gotta sleep 1st. 2molo onli read back. cant tahan oledi. good nite all.