UIshhh the voltage is not correct.....usually when load it will add up more voltage.to stabilise the proc..
not reducing..There is something seriously wrong there...

I understand when u said about added vcore but nothing happen.Right now Im increasing 100mhz,add 0.05v then OR for 1hour........

wah..the last of f3 has shown his face..hehehhe
Yeah some of us have problem get to 3.5 even with high vcore...I guess issue with temp??

not too sure..

dblooi,
I take 1 ur new batch F3..hehehe

OT* abit..to those wanna sell cheap2 X2 proc..please pm...

This post has been edited by CV6149: Nov 15 2007, 12:26 PM

I do not understand this......
what is 3,5,7???

I like 18bios than the latest(20 or 21)
give me more oc result than others..stability too have a diff result..

of coz no problem.I running more than 1500mhz 24/7.
and alot more running more than that also..heheh

This post has been edited by CV6149: Nov 20 2007, 10:09 AM

Aiikk..I thought u knew this all this while??




Just try it..IF no effect..then loose it...but im sure evrything 'pops' so fast hehe

and to bro xixo.thanx alot..tube i can handle...ace hardware got sell some high quality tubing also...

This post has been edited by CV6149: Nov 20 2007, 11:07 AM

err sorry I dont get you??

HT link depend on chipset rather than proc

]

none.
still HT link 1.2 and chipset 1.5.
Well it doesnt need to increase...stock can do 1.7ghz..its already high enuff..

Is there any issue to get past 3.5g??
Maybe need new f3?? heheheheh

This post has been edited by CV6149: Nov 23 2007, 07:32 PM

Yes!
absolutely!!

read and follow how to install it.
http://www.xtremesystems.org/forums/showthread.php?t=81429



this link is based on above link..more simplified version.

http://www.overclock3d.net/articles.php?ty...x2_hotfix_patch


Very2 important to install these patch.It will boost performance!

This post has been edited by CV6149: Nov 24 2007, 12:51 AM

not exactly correct bro...
Windows XP is actually designed to be use with Max 2core.
The patch is to enable this capabilities.

Great! post some new result bro...hehe

5-5-5-15??
come on bro..10th is crying u didnt treat her well..
make it 5-5-4-3-11@2.3v
shud not have side effect la..hehhe(i think )

---

Added on November 29, 2007, 12:32 amyeah..alot of new result......
and new problem also...whahahah

good luck to the new batch F3..

This post has been edited by CV6149: Nov 29 2007, 12:32 AM

let us know the result also...

8UM2DA09RXX
Im using this bios for now.

From my xprience..
there is an issue with certain divider with certain ram.Im using dblooi old dgkx.the ram is good but there is no way to pass 900mhz with it in DFI even though dblooi achieve higher clock in other mobo.Thus me change to 10th.With 10th,there is issue to use 667 divider.But it doesnt matter much also coz in order to use it up to 3.3ghz above I need to use 533div.

my advise use the divider u intend to use later on..well in this case shud be 533div.
Regarding issue auto set ram...try a new bios 1st...I realise that in this board whenever the setting change at POST diff from what u set.There is possiblities that setting is not stable enuff and dfi pandai2 change it (I think so hehe)

ur subtiming is something u have to trial and error...but D9 cant be too loose or overvolt

huh????
Im using Nforce4 chipset.......1800 is the highest achieved with no impact to stability at all.

I guees new bios revision will fix this..
Any new bios come out lately??

sighh..I cant join the F3 overclock madness.....
sold my heatsink

emmmm if only people know it..
that orthos 'eat' 1 of my dfi before...Well orthos around 8hour...shutdown and dun want to on anymore...

waiting to finish up my rojak diy WC..it seems too long when you have to 'do it yourself' eheheh