this one iam oc my x2 4000

@ Alive88.

In some reviews it shows that Tforce590 have 2.1v VDIMM And other reviews say 2.3V VDIMM.

Correct me if im wrong.

Good bro,even tho i never experienced using brisbane.

i realised that...my f3 is very hot...even on stock speed =x

really?but why at my board it have 2.2v jumper?

Okie2,give me time to google around.ill get the review on the net and keep you update.

What cooler r u using bro?

Whats the idle and load temp?

bro,how bout u test ur ballistix at 2.2 vdimm...see how far can it go

@2.2V still can go 3.3Ghz,but it fail orthos.

Only 2.25v to 2.35v passed everything.Its for me la.

haiya..need to lower the dvder lor..need to sacrifice performance..argh..i hate it

Thats what i did bro,even i cant run my ram with 800 divider.

Only works with 667 divider.But i think it can do 800 div if i pushed the vdimm to 2.45V

make the timing tighter bro..it should perform way better

This post has been edited by alive88: Dec 8 2007, 01:12 AM

Thats what i think of,but i think,i need to wait for my ram cooler 1st also.
Other than that,when i use memset,my pc always hang,but never try memset with F3 la,only my previous F2.
My 1st target is to run my ram with 800 divider first.
Hope it will go fine without 'BOOM'.

Thanx for both of you.I do really appreciate it.

no boom la bro..we should pair coz we use f3 n ballistix ..hoho...
afta this sure ill show my result...then we compare

dont worry lo...
vdimm2,2 is normal lo 4 high performance ram...
my TEAM ELITE using 2.1 vdimm 700mhz n 4-4-4-12
stable lo...
just make suke u get the correct voltage 4 ur part...

---

Added on December 8, 2007, 1:20 ambrisbane is more heat than windsor...so windsor more cooler than brisbane...just found out the right cooler 4 them...
like me..i just use evercool buffalo heatpipe n thermal take fan with it...
more efficient n some more cool

This post has been edited by extreem: Dec 8 2007, 01:20 AM

Hehe,no lah...
Im newbie only,still got mere to learn in OCing kaw kaw.

Orite,keep update.Good luck.

u all got f3 lo...
very syok ma ...
can oc kaw kaw...
like me just G1...waa...vry hard to oc...
need more vcore to oc higher...
and G1 not stable when reach 3ghz...

As for the rams,i think 1.8v to 2.2v is normal.
Above 2.35v w/o ram cooler,im not sure.

Thats what many brisby user said.
Brisby is hotter than windsor but people still manage to get 3Ghz above with it.
It more to luck.

that is totally wrong... 90nm cpu is hot than 65nm cpu....
even 90nm cpu is using more power than 65nm cpu.....
please dun simply use the default temp and compare...
use your real finger touch... go touch the heatsink..... with same vcore......
brisbane is known as the safe electric cpu.....

---

Added on December 8, 2007, 1:26 amwanna buy my brisbane? 3600+ can go 3ghz =X

This post has been edited by cyberloner: Dec 8 2007, 01:26 AM