ha issit?
that's 32M result
have u try to go even higher clock speed b4?
ur proc seem have a lot of space to push up further

still trying bro...
i know i can boot to windows with 3500... and dun test further... because i need pump a lot vcore to stable it
u can't imaging how hot is my pwm temp when upping vcore to 1.500.. over 100 and shut down =X
i will update any new result as soon as it is fully tested =X
Just hoping new ATI board doesn't that hot...
mind to share how is your pwm temp when u are overclocking or prime?
Gonna change to AX78 when it arrive ... hope it won't fail me..

PWM ICs are hot when u pump high vcore
that's common for all mobo
btw, what kinda PWM ICs are use on ur mobo? interfil ICs? or those half opened 1?
don't think ABIT will use interfil PWM ICs
what's ur mobo model adi? i go google search and have a look
and what's the estimated price for ur new baby AX78?

This post has been edited by dblooi: Dec 8 2007, 09:20 AM

bro i think brisby is cooler than my windsor~

when u open coretem u know why~

brisby mostly stay around 20++

but my windsor reach about 25-30c

@dblooi

free later??

around 12pm to 1pm ( not sure)

i go find u ok~

This post has been edited by tachlio: Dec 8 2007, 09:39 AM

brisbane DTS spoil
you will nv know the real temp of a brisbane proc by using software monitoring
when u use a thermometer to test it
you will get totally different answer


p/s:later 12pm to 1pm i free
waiting for u
can go for lunch if u want

This post has been edited by dblooi: Dec 8 2007, 09:41 AM

sorry litter OT nw~~

cant la~

i go with my GF later she scold me buy pc staff again

when i almosy arrive i call u ok

This post has been edited by tachlio: Dec 8 2007, 09:45 AM

@tachlio
how's ur D9GKX performance?
wondering how far it can goes
wat's the highest clock speed that u try b4?


p/s:wahh...later mod delete ur post baru tau
faster edit ur post, add some oc stuffs like me
hehe ok, later i wait for ur call

This post has been edited by dblooi: Dec 8 2007, 09:54 AM

Weeeee~ im getting my super talent PC6400 soon . Cant wait to get it and OC kaw2. Nway guys, any of you ever used supertalent ram B4?

bro dblooi,
3.1G@1.21v only stable for 1 instance of Pi 1M, run OCCT or 2 instances of SuperPI 32M giving me error.
maybe my mobo and others hardware not as powerful as urs...
however, i'm quite happy with it can passed the testing with 3ghz@+0.10v or 3.1ghz@0.15v coz the temperature is less then 40 degree celscius

bro cyberloner,
why i not prime for 24hrs? coz the TS set the standard or rule "Show your SuperPi 32M or Orthos [>1 hour] with CPU-Z overclocked screenshot " in order for us to list our oc result at this thread... this is his/this thread standard right?
well, if he set the rule to "Show your SuperPi 32M and Orthos [>24 hours] with CPU-Z overclocked screenshot", everyone will busy priming for sure...

This post has been edited by dreaming: Dec 8 2007, 12:05 PM

prime is s**k nowadays.. unless u play single core.. so use wut is suitable n do wut is the best

---

Added on December 8, 2007, 12:16 pmit's show edi, u need to pump a lot of vcore to make its super duper stable, to make faster assumption, just orthos, blend cpu n ram, after pass one test, just add more 2 notch vcore, n u r ready for good system

This post has been edited by xixo_12: Dec 8 2007, 12:33 PM

i think is higer than that..around 1.2v - 1.25v..

Nvm bro,its my 1st test.Still funding to get WC 1st then pump more and more vcore.

bro, i afraid u gonna be disappointed later
max vcore that good air cooling and good water cooling can reach has not much different
good air cooler can support ur proc till 1.6v-1.65v,
with good WC u can reach around 1.65v like that
but definitely the clockspeed won't be following,
due to the heat, though u adi pumped enough vcore,
unless u use ice+water cooling or even greater cooling
then that's different story
From what i know, no one can bench super pi stably at 3.7GHz with normal AC or WC

u guys dun understand why prime is important...
amd have limit... if oc more that its limit... add more vcore till 1.8 also prime will fail..
if u guys oc and drop back the clock for normal use then it is ok...
if u guys wanna use oc and use the clock... prime is the best tool to test it...

anyway .. instead of speedfan
use this
http://www.cpuid.com/hwmonitor.php
the best latest hardware monitor and showing the right vcore for uguru .. and abit =)

This post has been edited by cyberloner: Dec 8 2007, 08:48 PM

Thanx for the info bro.
In the mean time ill just use air cooling 1st,maybe later gonna get the WC for proc and ram.

Maybe im not gonna do above 3.5Ghz due to so many limitations like cant run prime 12 hours or 24 hours.

i tested my system..
cannot go to 3500.. prime few second only it hang liao... pump vcore to 1.550 also won't help...
finding the highest stable it can go temporary.......

This post has been edited by cyberloner: Dec 8 2007, 10:13 PM

Have u tried 3.45Ghz prime? is it stable?

My cpu reached the limit to 3.41Ghz prime 13 hours stable.

more that 3405 all surely prime fail...after few minutes cpu limit is reached...
3385mhz stable 24 hours...
3405mhz... stable 13 hours before... then fail... i drop my hytransport to prime it again....
normal use with this clock consider stable liao... (3405mhz)

this is the result i found after testing it for week =X

This post has been edited by cyberloner: Dec 8 2007, 10:28 PM

Well,for me,im satisfied with 3.41Ghz cuz its lot more better than old F2 that only can get 2.6Ghz
Just stick to it bro.
3405 Is more that enough d to work 24/7 and 365 days non stop.

One thing im not really satisfied,its about the voltage (vcore).My vcore will go down if run orthos,but when i stop running orthos or superPI or other stability test,it will increase back.

Let say my vcore is 1.5v,when i run orthos,it will go down till 1.46 to 1.47.
Is this thing normal?

not normal for me... no prime vcore is the vcore i set in bios ...
start prime... vcore increase and not drop....
are u using hwmonitor i recommend?
i never vdrop before... maybe that happen to u...

if wanna use 24 hours x 365 ... i prefer use the cpu that really prime 24 hours stable...

i cannot afford dataloss or some bad folder created by microsoft...
happen before... not enough vcore or not stable system.. cause sp2 extraction making a bad folder in hdd and u can't even del it...
i doing a lot unattended stuff for winxp and keep making those extraction...
slipstreaming... so on... packing software... with higher overclock i can manage make the 7zip compression more smaller... so on =)
so i will stuck at 3385 if it prime 24 hours stable again....

This post has been edited by cyberloner: Dec 8 2007, 11:11 PM