no bro , install the stronger ram to nearest dimm slot will lower down ur oc
hmm...let's explain it with an example

assuming that i've 2 sticks of crucial 10th,
one stick can reach 1300 ( call it as stick A)
another one can reach 1280 ( call it as stick B)

if i put stick A to nearer to cpu area and stick B next to it (forming dual channel)
most probably i will get 1240 like that only

if i put stick B to nearest dimm slot,
i will get roughly around 1260-1270 like that

the stronger stick should place at 2nd nearer dimm slot while the weaker one should place at nearest dimm slot in order to get best performance

This post has been edited by dblooi: Dec 5 2007, 01:05 PM

abang ong, mana iced water?
no more oc nowadays?
oh ya, how's the proc on DFI ultra2-m2?

TA690G bios download page

http://www.lejabeach.com/Biostar/TA690G/

Orthos is modified from prime95
with better GUI , more user friendly
bro cyberloner, glad to see ur F3 is freaking stable there
btw, mind to bench a super PI 1M result?
wish to see that particular from all buyers

@dreaming

glad to see ur results is finally out
hmm... but the vcore that u pump is a bit high
from my test report, your proc only need 1.21v in order to get 3.1G Pi 1M stable

ha issit?
that's 32M result
have u try to go even higher clock speed b4?
ur proc seem have a lot of space to push up further

PWM ICs are hot when u pump high vcore
that's common for all mobo
btw, what kinda PWM ICs are use on ur mobo? interfil ICs? or those half opened 1?
don't think ABIT will use interfil PWM ICs
what's ur mobo model adi? i go google search and have a look
and what's the estimated price for ur new baby AX78?

This post has been edited by dblooi: Dec 8 2007, 09:20 AM

brisbane DTS spoil
you will nv know the real temp of a brisbane proc by using software monitoring
when u use a thermometer to test it
you will get totally different answer


p/s:later 12pm to 1pm i free
waiting for u
can go for lunch if u want

This post has been edited by dblooi: Dec 8 2007, 09:41 AM

@tachlio
how's ur D9GKX performance?
wondering how far it can goes
wat's the highest clock speed that u try b4?


p/s:wahh...later mod delete ur post baru tau
faster edit ur post, add some oc stuffs like me
hehe ok, later i wait for ur call

This post has been edited by dblooi: Dec 8 2007, 09:54 AM

bro, i afraid u gonna be disappointed later
max vcore that good air cooling and good water cooling can reach has not much different
good air cooler can support ur proc till 1.6v-1.65v,
with good WC u can reach around 1.65v like that
but definitely the clockspeed won't be following,
due to the heat, though u adi pumped enough vcore,
unless u use ice+water cooling or even greater cooling
then that's different story
From what i know, no one can bench super pi stably at 3.7GHz with normal AC or WC

they gonna release B3 stepping next week
and no worries, intel also having problem with their 45nm pernynn quad core

This post has been edited by dblooi: Dec 9 2007, 11:08 AM

why don't u change ur ram timings in bios?
with memset, u can't change the cas latency imediately
unless u use the 'save' function , but i don't recommend it
if u save a wrong settings, u gonna be in big trouble
btw, always try to use the latest CPU-Z
and if can , try to prove ur oc result with CPU-Z validation link,
that's a good practise

This post has been edited by dblooi: Dec 9 2007, 11:56 AM

haha, i think i know ur problem adi
issit u save ur memset setting adi? save as CL3
if yes, just on ur memset again, save it into CL5
problem solved

edited: btw, good result you have there
is time to challege this

http://forum.lowyat.net/topic/321443


currently no V2 fella post result in that thread yet

This post has been edited by dblooi: Dec 9 2007, 12:43 PM

4400+ definitely out of choice
go for 4000+ G2 stepping (if able to get )

i won't responsible if later proc BBQed
make sure the proc temp control under 65C (full load) ya
you are safe to add till 1.7v if u able to do that

nice ram
nvm, luckily i know your home address
tonight u better don't sleep

p/s: try to oc adi?
1200MHz should be piece of cake with this ram

the her in his reply is refering his sister i guess
gentlemen, don't forget to post result in database ya

http://forum.lowyat.net/topic/321443

make it bcome F3 playground

cannot drop voltage?
i seriously doubt that
if it cannot do so, how come i'm using 0.8v 1GHz now?

sorry to say , but low end asus mobo is just piece of s**t
ugly PCB colour , use all chaplang components most of the time and unocable bios on most of their low end mobo

and about TA690G , so far there are few cons that i know

1) voltage drop for the vcore and vdimm (max vdimm can set is 2.65v, but after dropping left 2.6v only )
2) vdimm set to 2.3v , real vdimm go back to 1.9v
3) clockgen can only be supported when u do some changes in PLL setup (is it one of the cons? )

but to me, they are just some minor bugs. In overall this mobo still damn solid for overclocking

better wait for B3 stepping.
currently B2 stepping proc having TLB Errata bug