try to change ram timing.. maybe u still can use all in stock

Failed after several minutes in orthos..

using clockgen to get until 2.8 ha??
vcore too low..

Yeah I know.. Just wanna try how much it can go with stock vcore..

waa...good2...mine need to pump vcore till 1.4 then only it will stble.at 2.8 lor.
loosen the ram timing a bit...but super pi 32m couldnt pass..
2.8 ghz..
ram 466/6 5-4-4-12-20-2t
any suggestion?


This post has been edited by alive88: Oct 21 2007, 01:14 PM

RAM 466 = 900+Mhz already...
I think you need to loosen the timing and add vdimm..

Just now i tried with clockgen then suddenly it fails.. I restarted PC.. Now I don't run anything but the processor is working around 50%~80%.. Damn..

ive loosen it..but my mobo only support vdimm 2.1 only
try to chnge afta ths..

@amedion
ur proc is same like mine?u should easily oc till 2.8 maa. just pump ur vcore a bit. then there you go..

@alive88
Lower your divider then

-pWs-

@amedion..
2.7 that u got using clock gen?? is it stable??

@alive88
plz use lower divider and loose timing, u have limit in vdimm, dont push too much.. it cant work at all

i need to sacrifice lots of perfrmance if i lower the dvder... wht should i do...max vdimm is 2.2, if i use jumper on the board...
is ther any biostar tf590sli bios update tht can chnge the max vdimm?

@alive88
Lower your div and tighten your timing
It is the best way you can do

-pWs-

why my stock vcore is 1.312V and ur is 1.296

---

Added on October 21, 2007, 4:11 pmme too~

---

Added on October 21, 2007, 4:13 pmidle is about 24-28c. othtos full load is 46-50c

This post has been edited by tachlio: Oct 21 2007, 04:13 PM

Vdimm 2.1v where can do so much? Try CPU/7 ..

I use ClockGen to try first.. Then stable I set it in BIOS..
2.8Ghz sure cannot use stock vcore.. 2.7Ghz can but will fail orthos after an hour ..

Mine idle is around 30+.. Orthos full load 50+ ..

sacrifice lot of performances??

bro, tat the sweetest thing in AMD oc field, u need to sacrifice there to gain other, that why u need to be creative and know how far u want to oc and have the great combination...

follow as -pWs- says..use ur max vdimm, it is still in range of safe

---

Added on October 21, 2007, 5:27 pmtarget to use as daily ha??

get better cooling or downclock a little


This post has been edited by xixo_12: Oct 21 2007, 05:27 PM

ur is 2.7Ghz ma~ i js 2.5Ghz ~ better u downclock liter bit or change better cooler~

Just get the mobo that you wanted to get badly in ur mind.
If you think 690G is totally screw up, just dump it.
no point to buy something that you seriously doubt on it

This post has been edited by dblooi: Oct 21 2007, 09:37 PM

@ongbs

that's a memory controller bug of AMD.
you can tweak some insane ram timings by using 9.5x CPU multiplier
give a try

Hehe...Thanx sifoo...Just a bit curious here and there..
Nvm,ill find whats the best in my mind for now..
Thanx a lot for the feedback..

i saw 4 F3 users on the Pi 1M top 10 adi
more to go
those guys who buy F3 from me, i hope you guys can submit a result to Pi 1M top 10 thread.
I deeply appreciate it if you do so

i think u r on da way to get the superb hardware rite.. ballistix and so on.. wow.. totally modding with passion