ok...my SS

Bro, I need to learn from you as well on WC.
I know nothing about WC

Your 32 M should be better IMO
You could trash it kau kau after proper WC set up

to owner 3800+ F3 if u have in ur mind to sell it let me know...confirm i buy...jealous to see ur result here...

Have you try lower Vcore? Mine 1.32 can reach 2.7 already..

sumtimes different proc may stable at high vore..

@alive
u set it roughly or try one by one notch vcore??

waitng 4 phenom

This post has been edited by Oly: Oct 20 2007, 09:55 PM

quote=xixo_12,Oct 20 2007, 09:26 PM]sumtimes different proc may stable at high vore..

@alive
u set it roughly or try one by one notch vcore??

[/quote]

i try one by one..ive tried 1.35 vcore, but after 5 mnutes orthos..system alert.1.4 is the stable vcore..
guys... why cant i set my fsb more than 280? it wont boot, even if i use low ht mltplier and loosen the ram timing.

play first with proc..
set the divider at 400
then try to push back..
playing with safe vcore..

try it..
spread spectrum disabled

---

Added on October 20, 2007, 10:16 pmlower HT link summore set to 600

This post has been edited by xixo_12: Oct 20 2007, 10:16 PM

thanks xixo... will try tonite..

here i'm back. after a looong hari raya holiday.hahah.....wah~!! so many got their f3 already...really good result la...

hi there, i am new to here..
currently i upgrade my rig liou to
AMD Athlon™ 64 X2Dual Core Processor 5600+ Windsor ID 4| kokifung | ASUS M2A-MVP | Kingston DDR2 667 | Stock fan

erm.. using stock fan better not overclocked it right?

erm.. wat is you guys out there your processor's normal temperature? my wan day time 40-45; evening nearly 50-55; night 37-42

This post has been edited by kokifung: Oct 21 2007, 01:27 AM

Temp for all ppl quite different depends on casing ventilation and ambient temp.

I am currently test run Super PI 32M on my Winsor F3@3.0G rig, Vcore is 1.25V.
with Thermaltake Silent Water (WC), pump is running but I switch OFF the radiator fan.
Just curious will it pass 32M PI

haha...it just passed 32M PI with max load temp about 60C

This post has been edited by ongbs: Oct 21 2007, 01:54 AM


Attached thumbnail(s)

@ongbs

r u sure the vcore 1.576v?? for 3.0ghz.. quite shock

sorry bro, some bugs between CPU-Z and my mobo, actual Vcore is 1.25V

as i know.. cpu-z 1.41 giving more accurate reading and support high vcore too..
prob with ur mobo??
anyway nice try.. daily use ha??

no lah, confirm CPU-Z voltage reading problem, mobo BIOS ok.

Daily use may fix at 3.2G or 3.3G, will decide later

using wc or air??

4000+ X2 Brisbane G1 | AMDAthlon | Biostar TForce 560 A2+ | Kingston DDR2-667 | stock AMD cooler | 2625MHz

Will post picture soon.

How's mine?

This post has been edited by AMDAthlon: Oct 21 2007, 02:55 AM

not sure yet, because haven't try my CM Gemin II on this F3.

Guys, does all 690G mobo good for overclocking..?
Not sure here..