recommended xigmatek oso.. cheap plus berbaloi

now i'm having the prob to hit 3.5.. i wonder now..
i rasa cam nak campak my raptoxx 550w jauh2 pun ader..
once u say voltage sensitive.. i will try to check it back la..
3.2ghz at 1.32xv.. when OR it become 1.296V..
flactuates too much..

surprisingly.. change now to TTBTVX
the temp from 47c load n it become 41c only at load..
even pump more vcore at 1.6v, i cant pass 3.5ghz.. sad gler..

NOW Staying at 3.2ghz with flactuates 1.29~1.32V
with HT link 1600mhz n my lovely DDR2-1066 at 2.2V 5-5-5-15-20-2T

This post has been edited by xixo_12: Nov 12 2007, 01:45 PM

tu la pasal.. try to troubleshot.. now in malacca back.. gudbye my lovely rig..
eeee.. geram aku..waa..

u mean around 341~349?
haha.. didnt try.. love to up 100mhz per restart..hehe
xigmatek idling i think 39 kot.. load still below 60.. now change ttbtvx.. but tak try lagi
less than 1 min 3.5ghz fail.. then malas oc dah.. stay at 3.2.. balik nnti main lagi la

ok.. see u in february la.. the reason not bring coz.. will oc 24/7 without studying..haha

pump kaw kaw? hancus la proc i.. haha.. i lom puas main lagi.. hehe

@Dj..
same prob with mine.. still troubleshoot why cant pass.. maybe bro CV rite..sensitve to voltage

This post has been edited by xixo_12: Nov 12 2007, 08:09 PM

sumting? wut that? 3800+ F3 again?

mine 1600mhz...

@dblooi
i try to maintain default 1.20 for NB/SB n HT regulator, gempak gak mobo ni
tat is the higher i dapat.. not try to push lagi.. maybe after this

---

Added on November 13, 2007, 9:51 amkasi pinjam ram ko.. haha.. meh cni aku uat dia berfungsi.. , anyway waiting for ur SS

This post has been edited by xixo_12: Nov 13 2007, 09:54 AM

leh la tue.. temp?
pki stock ker??

yeay2 dapat main ram baru.. hehe.. i thought u wanna sell it.

for sure alive88 didnt use for 24/7 rig..

i think wut db try to mention is.. try to drag clockgen n validate ur cpuz to follow him at the back or maybe u can get the 4ghz.. for sure the system is not stable but u still have validate cpuz

dont bakar lagi proc ko dah la for 24/7

anyway to get 1600mhz HTL i need only 1.2v n NO ACTIVE COOLING..
just now oc with no casing.. n left at above polisterine to support all hardware..

before oc thinking about psu .. coz it is the main power to support all hardware.. if some hardware got not enough power.. it will cause failure..

yeop is one of the owner db handpicked proc.. while david is the last guy that very lucky

sure alot~~~
its just for benchmarking n fun only

stop folding 24/7

using memtest..

---

Added on November 15, 2007, 11:24 amif there is anything spesel than V1 proc.. count me in.. last time u said 3.8ghz 1.4V.. if there is no spesell.. tak yah la..haha

This post has been edited by xixo_12: Nov 15 2007, 11:31 AM

temp too high?
need to overcome this first then only can play higher clock..
anyway to all who wanted to own F3.. this is the chance

haha..

@dblooi
ble sampai stock??


This post has been edited by xixo_12: Nov 15 2007, 01:21 PM

but its still worth.. u can get at least 3ghz for 24/7.. wut it need just proper cooling solution onli..

@alive
spend oso on cooling
rm250 FOR F3 + rm1xx= Rm3xx

This post has been edited by xixo_12: Nov 15 2007, 05:46 PM

nola.. just hoping that it will not too hot..
think twise after the item arrive n test by DB..
u use tttbtvx.. it can overcome the heat.. at least manage to get 3.2ghz.. around 46c maybe

This post has been edited by xixo_12: Nov 15 2007, 06:20 PM

lor xigmatek 92mm cukup r

leh..tapi aku pki tt now.. good r compare to xigmatek 92mm

This post has been edited by xixo_12: Nov 15 2007, 08:14 PM