My one okay je since tester time.

Stick too near to metal?

Why don't you show how you installed and do everyone a favour.

No matter how much TS insists or spin; the reality remain many users are unsatisfied with TNG RFID.

This post has been edited by icemanfx: Feb 1 2023, 05:20 PM

Above bumper (plastic) so it's nearer to bumper

I just cannot brain idiots who put their rfid behind no.plate, or some hidden area, or “protected” by nature area.

For fucks sake, just follow whatever the fucking reccomendation is, don’t be a fucking idiot who keluar pattern banyak banyak.

My car constantly speed up as long as no car in front up to 200kmh, my whole bonnet and windshield is filled with shitload of stonechip, yet my rfid at headlight is still working fine, i’ve been using since it was offered for free during trials.

And let me tell you, i never, NEVER even once got stucked because of my own rfid. Never.

Btw the dude who says pass rfid at 60km/h must be pulling that number outta his ass, that is impossible as the fastest gate would need 1 second to raise, and the scanner isn’t even placed 15m away from the gate. Just post a handphone video record of where and how u pass it at 60km/h, that is just plain stupid.

No, I do that as well. I tried 5 places (yes I bought the damn RFID tag 5 times already).

Front windscreen, front left light and other places.

End up with the best locations, on front bumper facing upwards and on another car, behind the number plate

I am tat dude


So what happened? The stone damage RFID?

I guess as long stick at non metal is ok.

This post has been edited by vapanel: Feb 1 2023, 04:35 PM

Stick at headlight become like this later

Post video share abit how u manage to pass toll at 60km/h.

Either you have a faulty overestimated speedometer like a kapchai (ie, meter show the 120km/h, but gps speed barely 100), or you are really bad at judging how fast is 60km/h

Ya that’s correct. Hell even without the “heat” from headlight i would WANT my rfid sticker to behave exactly like the video - the moment you peel it off - the sticker should be fucked up so people can’t just steal your rfi to pass toll.

after reading this
many rifd users still have issues at the toll gate..

no rifd placement has 100 % success.
why even bother

i use a holder to put inside my car. ok. go slow by 20-30km/h. no problems yet.

place outside x tahan lasak. rain and sunshine. your call. i take the acrylic holder any day.




This post has been edited by tolongking: Feb 1 2023, 05:02 PM

I've checked mine definitely 5cm away from any metal...

60kmh through the toll barrier? Give video then only i believe. If 6kmh i believe.

I still slow down eventhough 90% success rate is xcept for some tolls with readers that are not installed properly..

Btw b40 dun use SmartTags, even m40s.

Nope
Headlight is 100% hit rate

You are part of the problem

Nope.

Maybe need 10cm

That's why I stick near bumper.

mine opposite
if stick at left headlamp, kenot detect
so i requested for a free replacement and this time stick on windscreen outside, now always detected

Trust me

I don't because I want to do middle finger to SmartTag user

Jgn sin ka Lan la TS...

Headlight could be 3cm from bonnet or fender, which are steel.