Hi guys,
I going to do some similar wall mount table as this below YouTube.
https://youtu.be/sZisV_coMig

Table size will be 7ft x 2ft.
Bought 4 stainless Steel bracket which rated 50kg to 150kg per pair..
4pcs (2 pair) I think min can handle 100kg over.
Table not sure how heavy assume will be around 10kg?
Bracket similar item
https://shopee.com.my/product/126723020/105...55-1672397001.9
I will put my bracket for every 42cm evenly. (edge no bracket)
Layout from top for bracket n tabletop


I will put a monitor and some laptop and some stuff. Should total weight less than 100kg
.
Here come the question. I ask the seller about screw they jz said any screw that fit the hole .. Feel like going to screw the seller

Which screw should I put in?
I have some sturdy screw, diameter 5mm length after go through the bracket only left 2cm to go into wall.

Ia this able to support my requirement?

I have another 8mm anchor wall plug, but feel it's overkill bcz need to drill very big hole and very deep.(need use 10mm or 12mm drill bits) prefer not to go this option




This post has been edited by eddie2020: Dec 30 2022, 07:10 PM

OK maybe tmrw I go Mr DIY to see if I able. To find these screw.
I bought the bracket don't wanna waste it..
Can see your setting?
Earlier I thought of buying wall mount monitor bracket but it can't adjust up down so I end up buying desk arm
I guess every 50cm square 1 bracket is quite good?
If it's not working it won't sudden drop but slowly bend rite?

You mean it will slowly bend? I will find longer screw and hope the bracket enuf strong..

You mean sudden drop down? Haha

Oh I was considering that type of bracket as well..
I bought 10 inch x 18 inch.. Considering my table roughly 24 inch
So it cover 3/4 of my table depth. Perhaps I try mount it on and see if it's sturdy or not. What type of screw you use? And how heavy estimated your cpu?

Seems like overkill if I put 8 of 12mm hole on my wall.

Child seat is different got guidance on height..
But for this I can't find any proper referral on load etc..

https://shopee.com.my/product/111956666/591...55-1672410517.9
Maybe add another pair make 12 hole with 6 bracket...

This post has been edited by eddie2020: Dec 30 2022, 10:31 PM

https://shopee.com.my/product/225619814/973...87-1672512343.9 izzit this type of plug? Haha I think it's quite sturdy as 10kg with 2 bracket and the shelf is not really long or deep

haha my cloth hanger mounter on wall i use 4 big screw, still holding well.
Cloth hanger most also drop my cloth, if work station drop it hurts wallet 9 9 . . Ya will use wall plug . . but the nut when i screw off the wall plug will be just nice without the thread coming out. I think thats alright.

ya... since everyone suggest i guess i will go with sleeve anchor.