Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

 Ditch Router, use Maxis VoIP on other device!, Works on MicroSIP too

views
     
ruifung
post Jun 29 2023, 04:22 PM

Getting Started
**
Junior Member
82 posts

Joined: Aug 2010
@Anime4000

Aminia MA131 User Agent

MA131 SIP-stdR11448 2.1.13m_20200214 <SN>

This post has been edited by ruifung: Jun 29 2023, 04:55 PM
ruifung
post Jun 29 2023, 06:12 PM

Getting Started
**
Junior Member
82 posts

Joined: Aug 2010
In my case, I'm not using vlan 822, and directly going over PPPoE link. Seems to work find behind NAT with RPORT enabled.
If you're having issues with NAT/Stateful Firewall forgetting the UDP session, set Qualify in the pjsip trunk advanced settings to make freepbx send a SIP OPTIONS packet periodically.

Instructions for configuring with FreePBX

1. Set User-Agent (/etc/asterisk/pjsip_custom_post.conf)
CODE

[global](+type=global)
user_agent=<User Agent>


2. Create Trunk (Connectivity -> Trunks)
CODE

[General]
Outbound Caller ID: Phone number with country code

[pjsip Settings - General]
Username: <SIP Username; i.e. Your phone number>
Auth Username: <SIP Username>
Secret: <SIP Password>
Authentication: Outbound
Registration: Send
SIP Server: homesip.maxis.com.my
SIP Server Port: <blank>
Context: from-trunk
Transport: (0.0.0.0-udp is the default only enabled transport)

[pjsip Settings - Advanced]
DTMF Mode: Inband
Send Line in Registration: Yes
Qualify Frequency: 0
Outbound Proxy: sip:homegw01.maxis.com.my\;lr
Contact User: <SIP Username>
From Domain: homesip.maxis.com.my
From User: <SIP Username>
Force rport: Yes

[pjsip Settings - Codecs]
ulaw, alaw


3. Create Outbound Route (Connectivity -> Outbound Routes)
CODE

Route CID: Your phone number
Override extension: Yes
Trunk Sequence for Matched Routes: (Select the trunk you created above)
Dial Patterns: (Alter as desired)
1. Match Pattern +X.
2. Prepend: +60, Prefix: 0, Match Pattern X.


4. Create Inbound Routes (Connectivity -> Inbound Routes)
CODE

1. Set destination to your desired destination (Created separately as desired)
e.g. Ring Groups (Applications -> Ring Groups), Extensions (Applications -> Extensions)


5. Test calling.

This post has been edited by ruifung: Jun 29 2023, 10:15 PM
« Next Oldest · Networks and Broadband · Next Newest »
 

Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0190sec    0.77    7 queries    GZIP Disabled
Time is now: 26th November 2025 - 06:55 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.