ok next year im gettting 205/55/15.. next year la.. if now then standard tyres what to do?

hmm..ya lar..
no standard 15 inch rim use 205 right? tyres stock sure difficult.
the old perdana rim was 15 inch, is tyres 205?

---

Added on November 2, 2007, 4:17 pmthe more i see persona tyres, the more i find it rather slim

This post has been edited by BudoKid2002: Nov 2 2007, 04:17 PM

but i hate 16'.. (had bad experience)
just found out 205/55/15 is rare. mostly japanese rims.
but do you know what i like? those bmw rims.. 205/60/15.. cun beb! baru kena!

the soaking of bumps and humps will get better as the mountings/bushing 'masak' over time. seems like running in for this car does not limit to engine alone but span to brakes also. power window need running in or not? hahaha..
on the black persona menacing look, i agree with you.. look fast even at still. the closest thing to a black 407 or black 8th gen civic. muahaha.. soak it up jangan tak soak it up!

This post has been edited by BudoKid2002: Nov 6 2007, 01:36 PM

weh myvi dont play play... myvi got dvvt ... "dvvt is like vtec"..yeah right..
1.3 with dvvt same power with 2.0
persona drink fuel at town driving, safe fuel highway driving.. but dont worry, myvi drink fuel at town AND highway driving.

aggranox, fact is, majority of malaysian do compare car and categorize it by price bracket. that is why i alway said to this people, myvi suit them better.

---

Added on November 12, 2007, 10:51 amwhy? coz myvi easier to drive and can carry dog at the back

This post has been edited by BudoKid2002: Nov 12 2007, 10:51 AM

here we go again, fuel consumption talk
the fc meter is good as guidelines but it not accurate as it average out every 500m and need to reset few times.

my findings, for auto,

city driving with idling while waiting
fc meter shows 10-11litre/100km
own calculation, 40-45km every rm10

highways only
fc meter shows 6.5-7.4litre/100km
own calculation, 50-55km every rm10

its a guzzler at city due to weight, worse if wait in car idling coz higher rpm. leave at N its 980rpm, engage D, its 850rpm. plus, dohc engine idle higher compared to manual sohc mitsu waja idle at 650rpm.

This post has been edited by BudoKid2002: Nov 12 2007, 12:59 PM

yes, but no dvvt lor

ultima, mine is 15'. but i always tempted to opt for 16'.
to me downside to 16' as everybody know is
- tyre much more expensive,
- low profile means harder on bumps
- somehow the tyre worn faster
- everything else worn faster
- need to recalibrate meter
but if you already like, anything also can, no want can stop you.

get those deep sport rims la..put wider tyre

VIP look seems to be the 'IN' thing nowdays..
big2 rims, low, low profile, lowered, dark tinted.
thse VIP look requires VIP pocket to maintain. highly reserve for anak dato and anak mafia. if you cant afford it, dont bring trouble to yourself. or your parents.

i think hes using mudguard/mudflip
mine without already have tar chips sticking.. dang!

dont drive fast la on bumps like that. even wira on full load also scratch.
so was it the oil sump or exhaust kena first?

savvy is quite stable at 170km/h
right peyno?

hahaha.. im also having problem finding offset spec lastime. everybody said differently even proton website.
i guess the correct way is to measure yourself at kedai tayar..
195/50/15
195mm is width of tayar thread surface - the surface that touch the road.
60percent is ratio of tyre height to width. aka 'profile'. the lower, the thinner.
15inch is rim diameter lah..
offset is jarak dari tengah rim to lubang rim untuk screw nut. deep dish rim have negative offset. maknanya tempat nak screw nut jauh kedalam.
measure your metal rims la get the correct offset. offset ada limit kalau tak, bawak nanti belok feels funny coz turning radius lari, but some people just live with it.
rim lubang ada 4 bang, pcd ada 2 jenis jer.. 114.3(waja, iswara, gen2, persona, perdana) atau 100(wira). rim 8 lubang boleh masuk dua2 jenis pcd nih. rim 5 lubang category sundrik.

This post has been edited by BudoKid2002: Nov 13 2007, 11:39 AM

rim tuh offset dia berapa? dari kereta apa?
rim memang boleh masuk, asalkan pcd sama..
tapi offset tak boleh lari banyak sangat.. ada orang tambah spacer untuk tambah offset, tapi ko pernah tengok tak, kete yang rim dia macam terkeluar.. tak cun beb. u-turn pun boleh lari nanti. bawak mak mertua nanti dia marah..
sebelum beli tengok dulu, try pasang. compare sekali dgn rim yang sedia ada.

---

Added on November 13, 2007, 12:06 pmpersona offset, some say 60, some say 65.. in mm i suppose.

This post has been edited by BudoKid2002: Nov 13 2007, 12:06 PM

ok, just confirm gen2 offset is 46.. is it the same as persona? i dont know ..should be right?
persona tyre profile is 60, gen2 is 55.
the 60 and 65 i believe is gathered from 6.5jj, 6.0jj

imported rims mahal bai.. rm1500 berani?
local rims or imitation rm800
kalau nak murah dan imported, kedai potong ada jual japanese rims.

morning.. saw this ad.. blueberry tea anyone?

Subject : Persona baru 2000km for sale

Description:

Persona High Line...baru 2000km jalan...owner baru kawin dan dah berpindah ke Dubai...dah service utk 1000km.

Harga asal RM55,+++, so nak jual RM52,000(nego).

Spec High line, color blueberry.

Name: fauzi

modul bersepadu minyak udara (IAFM)
integrated air fuel module

inlet manifold plastic tuh.. notice the car in pic is blueberry persona
ada sesiapa tau tak kete apa yang guna similar tech.. manifold plastic?