Mikey, there u go, as requested. Rename to .CAB to run it.


Attached File(s)
 MissedCallReminder_1_1_.2.txt ( 133.87k ) Number of downloads: 7

Dear Ed,

so pleasantly surprised to get the file in such an early time. thanks ya.

No one tried this at all? Trust me, it will give you a whole different feeling towards yr KS20. It felt completely different and NEW! I am loving it more...

It will also drain your battery as much as you are enjoying the new sensation!

Oh yes, I am aware of the higher battery usage as well as shortening the life of the vibrator motor but then, it just feels superb. U hv Omnia, you sud know how different it is compared to KS20 without haptics.

By the way DrWho, do u hv any comments about the "screen sensitivity" we talked about on the last page?

i think it is still under control and not that thirsty
by the way, any idea what is the purpose of the PRIORITY?
and what is the Vibrate Duration you guys are using?

Maan, I am using 60ms. Actually the default of 50ms is a bit too soft, it stops vibrating even before the motor reaches it's max vibration momentum. I love it at 70ms but I think it's too strong especially when I am typing thru the PCM keyboard.

On the other hand, since this is a program driver and not application, it's not lagging at all.

Not sure abt priority but I set it at 1.

I have disabled the Haptics on my Omnia.

My missus is now using the KS20 so I can't check now. There is no logic about the MaxCalError utilising that amount of additional resources. Before the recalibrating of the screen sensitivity, I practically almost have to stab the screen to execute a command. More so when tapping a very small icon.

Try this. Soft reset and check memory status. Recalibrate sensitivity and soft reset and check memory status. See the difference.

I use 50, i think it is good enough.
it is really creating lot of fun after installed it

Hi DrWho,

I did what you've mentioned actually. My free Ram was hovering around 31-32mb but after setting the sensitivity to 20, it went down to 29.xx. It was okay initially after soft-reset but after using some applications, it went down to 29.xx and will not come up again even I tried FreeRam.

At first, I thought it was the new GIF I used for my S2U2. After that, the phone lags more frequently (like I mentioned to you before abt my lagging). So I've decided to try setting the setting back to 16 and do a soft-reset. Since then, even with the same GIF for S2U2, it stays around 32mb all the time and the feeling of lagging does not happen anymore.

---

Added on November 25, 2008, 4:26 pmGlad u like it!

This post has been edited by stutzedward: Nov 25 2008, 04:26 PM

Dear Ed,

troubling you again. your iPhone pcm keyboard skin zip file cannot be opened as it said "unexpected end of archive" ..... how?

thanks

anyone interested in getting my lg ks20?
price is negotiable. check my signature below

hi guys, new ks20 owner here. hehe... does anyone know how to make video call thru this pda? i tried to do the setting but maxis doesn't seem to have it. any idea guys?

Welcome to this forum. The simplest and quickest way is to request all the configuration settings from Maxis.com.my from your PC. They will send the setting to you almost immediately.

---

Added on November 25, 2008, 9:02 pmI don't have time to test the KS20 extensively like what you have done. He is my findings:

Immediately after soft reset memories are almost the same with 22 having 0.1MB higher memory than 16.
22 seems to give a faster response than 16.
I have no possible explanation for our different experiences, except MW6.1 versus WM6.0

This post has been edited by DrWho: Nov 25 2008, 09:02 PM

yea, i tried. but i still cant make video calls from my phone.

I have similar problems with several of my phpnes before. the troublesome way is to go to maxis service centre and they can immediately set for you thru their pc. hope it helps.

DrWho, I am just guessing the setting of 22 will only take up more resources the longer you use it. Anyhow, I'm fine with it at 16 cos I do not have any screen protector. Thanks for the verification.

---

Added on November 26, 2008, 7:57 amMikey, put only the .skin and .layout file in yr Program Files/PCM Keyboard directory. You can ignore those .jpg or .png.

This post has been edited by stutzedward: Nov 26 2008, 07:57 AM

Morning Ed,

your skin file cannot be unzipped. it says 'unexpected end of archive file format'. where can i get the file again and unzip?

thanks man

Cannot be unziped? It's just a simple Windows Zip File, pls download again, prolly u downloaded half way thru.

Ed,

downloaded 7 times. but will try again with another pc.

thanks ya.... so sory for the trouble.